3M Glass Cloth Electrical Tape 69 with Silicone Pressure-Sensitive Adhesive Data Sheet November 2008 Description 3M Glass Cloth Electrical Tape 69 is a white glass cloth tape with a high-temperature thermosetting silicone pressure-sensitive adhesive. It is designed for use in 600-volt dry location applications motors, and transformers with and without varnish coating. Key attributes like high mechanical strength and resistance to high temperatures provide excellent performance. The thermosetting adhesive provides an increased bond once applied in areas of high ambient temperatures. The thermosetting adhesive provides elevated temperature performance up to Class N 392F (200 C) temperature rating. This tape provides insulation and solvent-resistant protection for use as coil cover, anchor, banding and core, layer and crossover insulation. This tape features a non- corrosive adhesive. It is conformable, printable and flame retardant. Agency Approvals, Self Certifications, MIL Specs Meets Requirements of: Military Specification No. Mil-1-19166C UL Recognized Component listing for 200 C (Guide OANZ2, File E17385) CSA Accepted Component 180 C, File LR93411 RoHS Compliant 2002/95/EC means that the product or part (Product) does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2002/618/EC, unless the substance is in an application that is exempt under RoHS. This information represents 3Ms knowledge and belief, which may be based in whole or in part on information provided by third party suppliers to 3M. 3 1 of 3 3M Glass Cloth Electrical Tape 69 Applications Insulating electric and induction-type furnace power supply leads Securing high-temperature, non-PSA insulation (such as asbestos and glass) in high-temperature areas Securing Scotch Fire Retardant Electric Arc Proofing Tape 77 Splicing wire SF and SFF rated 302 F (150 C), 356 F (180 C) Reinsulating and repairing coils on mining machines Splicing silicone-covered glass wire where splices require more abrasion resistance and mechanical strength than can be provided by silicone tapes Insulating Class H dry-type transformer leads Insulating splices made on SA type wire in heat treat areas Especially suited to high-temperature applications Used in a variety of coil/transformer and motor applications, including an outer wrap for bobbin wound coils, banding arbor wound coils, lead pad hold down, end turn and lead anchor and connection. Typical Properties Data is not for specifications. Values are typical and should not be considered minimum or maximum. Properties measured at room temperature 73 F (~23 C) unless otherwise stated. Physical Property (Test Method) Typical Value (ASTM D1000 unless noted) US units (metric) Color white Adhesive silicone Backing Thickness 5.0 mils (0,125 mm) Total Thickness 7.0 mils (0,177 mm) Elongation (% at break) 5% Operating Temperature 200 C Adhesion to Steel 40 oz/in (4.4 N/10 mm) UL 510 Flame Retardant Yes Electrical Property (Test Method) Typical Value (ASTM D1000 unless noted) US units (metric) Dielectric Breakdown 3000 V Breaking Strength 180 lbs/in (314 N/10 mm) 4 Insulation Resistance 4.8 x 10 megohms CTI Material Group 1 Electrolytic Corrosion Factor 3M Test Method 0.9 2 of 3