40 Printed and Unprinted Antistatic Utility Tape Data Sheet 3M 40 Printed and Unprinted Antistatic Utility Tapes Applications represent a breakthrough in PSA tape technology. This new Office/Clean Room/Work Station tape, which generates less than 50 volts on unwind and Holding notes of work orders removal from stainless steel, helps prevent ESD damage to Holding obstruction down sensitive electronic components in manufacturing Third hand, general purpose environments. Triboelectric charge may vary with your Manufacturing application and environment. Close static shielding bags Conformal coating/maskins Patented Technology Holding and sealing supplies Packaging 3M antistatic utility tape is a transparent Box, bag and container sealing/holding DIP Tubes polyester film tape with acrylic Removing Contaminants adhesive. Made with a proprietary Label Stock technology, the tape generates extremely low levels of triboelectric charge when Call 1-800-328-1368 for more information or the name of it is unwound from the roll and also your nearest 3M ELPD Division authorized distributor. when removed from most surfaces on which it is placed. This makes the tape an excellent choice for use near Typical Properties electronic components and assemblies. Property/Unit of Measure Test Method Typical Value The tape is supplied on 36 yard and 72 yard rolls on 1 and 3 cores. ELECTRICAL PROPERTIES Static charge generation: Superior Performance Removal from roll, 10% RH, volts 3M 20 3M antistatic utility tape can be used at Removal from roll, static-safeguard workstations as part of 50% RH, volts 3M 5 your total static control program. It Removal from stainless generates very low levels of static steel, 10% RH, volts 3M 50 charge even in dry conditions of 10% Removal from stainless RH. The tape is supplied on a paper steel, 50% RH, volts 3M 5 core antistatic plastic cores are available to minimize particulate Surface resistance: contamination in clean work areas. 6 Adhesive 50% RH, ESD Assoc. 5 x 10 STD 11.11 40 Printed for Protection 6 Adhesive 10% RH, ESD Assoc. 5 x 10 STD 11.11 The tape is printed on the adhesive side with the 3M logo and the ESD TAPE PROPERTIES Protective Symbol. This reminds workers that 40 tape is the Adhesion to steel, oz/inch ASTM D 1000 15 only utility tape you allow in static-safeguarded areas. Unwind force from roll, oz/inch ASTM D 1000 24 Thickness, mils ASTM D 1000 2.2 Break strength, lb./inch ASTM D 1000 20 Slit width, inch ASTM D 1000 1/64 Non - outgassing TML ASTM E 595 <1.0% CVCM ASTM E 595 <0.1%Important Notice If any goods supplied or processed by or on behalf of 3M prove on Technical information provided by 3M is based on experience and/or tests inspection to be defective in material or workmanship, 3M will (at its believed to be reliable, but their accuracy is not guaranteed and the results may option) replace the same or refund to the Buyer the price paid for the not be relevant to every users application. For this reason 3M does not accept goods or services. Except as set our above, all warranties and responsibility or liability, direct or consequential, arising from reliance upon any conditions, whether express or implied, statutory or otherwise are information provided and the user should determine the suitability of the products excluded to the fullest extent permissible at law. for their intended use. Nothing in this statement will be deemed to exclude or 3M and Scotchcast are trademarks of the 3M Company. Printed in restrict 3Ms liability for death or personal injury arising from its negligence. All the UK. questions of liability relating to 3M products are governed by the sellers terms of 3M United Kingdom PLC, 1999 sale subject where applicable to the prevailing law 3M Ireland 3M United Kingdom PLC Electrical products Group Electrical Products Group Innovation 3M House, Adelphi Centre Hudson Road Jan. 2000 Dun Loaghaire, CO. Dublin, Ireland Bedford MK41 0HR Tel: (01) 2803555 Tel: 01234 268868 Fax: (01) 2803509 Fax: 01234 229433