3 Double Coated Tapes with Adhesive 300 444 444PC 9009 9019 9039 Technical Data September, 2008 Product Description 3M Double Coated Tapes with 3M Adhesive 300 feature a thin polyester film for dimensional stability and improved handling with ease of die cutting and laminating. The high tack adhesive provides relatively high initial adhesion and good shear holding power to a variety of surfaces. The carrier also provides easier handling during slitting and die cutting. 1 2 Faceside Backside Construction Adhesive Carrier Adhesive Liner Total Tape Product Type/ Type/ Type/ Color, Type, Liner Thickness Number Thickness Thickness Thickness Print Caliper (w/o liner) 3 3M Double 300/ Clear PET 300/ White, 55 , 0.003 0.0039 Coated Tape 0.002 0.0005 0.0014 Densified Kraft, (0.076mm) (0.10mm) 444 (0.051mm) (0.013mm) (0.036mm) No print 3 3M Double 300/ Clear PET 300/ Tan, 58 , 0.004 0.0039 Coated Tape 0.002 0.0005 0.0014 Polycoated Kraft, (0.10mm) (0.10mm) 444PC (0.051mm) (0.013mm) (0.036mm) No print 3 3M Double 300/ Clear PET 300/ White, 55 , 0.003 0.0021 Coated Tape 0.0008 0.0005 0.0008 Densified Kraft, (0.076mm) (0.05mm) 9009 (0.020mm) (0.013mm) (0.020mm) No print 3 3M Double 300/ Clear PET 300/ White, 55 , 0.003 0.0011 Coated Tape 0.0003 0.0005 0.0003 Densified Kraft, (0.076mm) (0.03mm) 9019 (0.0084mm) (0.013mm) (0.0084mm) No print 3 3M Double 300/ PET 300/ Clear, 55 , 3.0 mils 0.0035 Coated Tape 0.0015 0.0005 0.0015 Densified Kraft, (0.076mm) (0.09mm) 9039 (0.038mm) (0.013mm) (0.038mm) No print Note 1: Faceside adhesive is on the interior of the roll, exposed when unwound. Note 2: Backside adhesive is on the exterior of the roll, exposed when liner is removed. Note 3: PET (Polyester). The caliper listed is based on a calculation from manufacturing controlled adhesive coat weights using a density of 1.012 g/cc.TM 3M Double Coated Tapes with Adhesive 300 444 444PC 9009 9019 9039 Note: The following technical information and data should be considered representative Typical Physical Properties or typical only and should not be used for specification purposes. and Performance Characteristics Product Number 3M Double Coated 3M Double Coated 3M Double Coated 3M Double Coated Tapes 444, 444PC Tape 9009 Tape 9019 Tape 9039 Adhesion to stainless steel Oz/in Oz/in Oz/in Oz/in ASTM D3330 - 90 degree (N/100mm) (N/100mm) (N/100mm) (N/100mm) - 15 minute RT 32 (35) 54 (59) 22 (24) 67 (73) - 72 hour RT 61 (66) 61 (66) 27 (29) 82 (90) - 72 hour 158F (70C) 86 (94) 76 (83) 36 (39) 98 (107) ASTM D3330 - 180 degree, 2 mil al foil - 72 hour RT 115 (125) 82 (89) 33 (36) 129 (141) 3) Adhesion to other surfaces* ASTM D3330 - 90 degree, 2 mil al foil, 72 hour RT ABS 55 (60) 59 (64) 24 (26) 73 (80) Polycarbonate 64 (70) 61 (66) 26 (28) 80 (88) Polyester 61 (66) 77 (84) Polypropylene 43 (47) Shear Strength - ASTM D3654 2 modified - (.5 inch sample size) 1000 grams at 72F (22C) 813 minutes 1593 minutes 885 minutes 924 minutes 500 grams at 158F (70C) 3 minutes 7 minutes 3 minutes 4 minutes Relative Solvent Resistance Medium-Low Medium-Low Medium-Low Medium-Low UV Resistance Medium Medium Medium Medium Relative High Temperature Operating Ranges: Long Term (days, weeks) 180F (82C) 180F (82C) 180F (82C) 180F (82C) Short Term (minutes, hours) 250F (121C) 250F (121C) 250F (121C) 250F (121C) Available Sizes Product Number 3M double coated 3M double coated 3M double coated 3M double coated tapes 444, 444PC tape 9009 tape 9019 tape 9039 Available Lengths (Subject to Minimum order requirements) Standard 36 yd (33 m) 36 yd (33 m) 36 yd (33 m) 36 yd (33 m) Maximum Length 1/4 to 1/2 180 yd (165 m) 180 yd (165 m) 180 yd (165 m) 180 yd (165 m) 1/2 to 48 360 yd (329 m) 360 yd (329 m) 360 yd (329 m) 360 yd (329 m) Available Widths Minimum 1/4 (6.35 mm) 1/4 (6.35 mm) 1/4 (6.35 mm) 1/4 (6.35 mm) Maximum 48 (1219 mm) 54 (1372 mm) 54 (1372 mm) 54 (1372 mm) Normal Slitting Tolerance 1/32 (0.8 mm) 1/32 (0.8 mm) 1/32 (0.8 mm) 1/32 (0.8 mm) Core Size 3.0 (76.2 mm) 3.0 (76.2 mm) 3.0 (76.2 mm) 3.0 (76.2 mm) - 2 -