4532+ Technical Data Sheet Sizing 3M Protective Coverall 4532+ An appropriate size garment should be selected to allow sufficient movement The 3M Protective Coverall 4532+ offers an excellent combination of for the task. breathable material comfort, with enhanced liquid and dust protection. The 5 layer SSMMS material is specially treated to increase the repellence to certain Height Chest oils and solvents enabling this product to be used in many applications not usually suitable for SMS-based coveralls. The 3M protective coverall 4532+ S 64 67 in 164 170 cm 33 36 in 84 92 cm is certified to Type 5 and Type 6, to protect against certain hazardous dusts 66 69 in 167 176 cm 36 39 in 92 100 cm M and light liquid splashes, and offers radioactive particulate protection to EN 69 71 in 174 181 cm 39 43 in 100 108 cm L 1073-2 and Antistatic protection to EN 1149. 70 74 in 179 187 cm 43 45 in 108 115 cm XL Key Features XXL 73 76 in 186 194 cm 45 49 in 115 124 cm Excellent barrier against dry particles and certain limited liquid chemical 3XL 76 78 in 194 200 cm 49 52 in 124 132 cm splash (CE Type 5/6) 78 81 in 200 206 cm 52 55 in 132 140 cm 4XL Alcohol and oil repellence treatment Robust yet soft highly breathable SSMMS material Storage and Disposal Fabric has an anti-static treatment Store in dry, clean conditions in original packaging Elasticated waist and ankles for convenience and freedom of movement Store away from direct sunlight, sources of high temperature and solvent and knitted cuffs for extra comfort vapours 2-way zipper with sealable storm flap for added on-off convenience and Store within the temperature range -20C to +25C and with relative extra protection humidity below 80% Low linting Shelf life is three years from date of manufacture when stored as stated Enhanced and reinforced triangular gusset panel above 3 panel hood for optimal fit Replace garments if damaged, heavily contaminated or in accordance Available in blue (with a light blue triangle back panel) and Cool White with local work practice Handle and dispose of contaminated garments with care and in Comfort and Protection accordance with applicable regulations Liquid Type 6 - Light Liquid Splashes Protection (EN 13034:2005 + A1:2009) Storage and Disposal Dust Type 5 - Solid Airborne Particulates Protection (EN ISO 13982-1:2004 +A1:2010) Do not wash Do not dry clean Anti-static Anti-static treatment* on both sides Flammable keep away Do not bleach from sparks or flames Radioactive particulates Nuclear (EN 1073-2:2002) Class 1 Single use do not Do not iron Except EN863 puncture resistance. Does not offer protection against radiation. re-use * All apparel must be suitably grounded for anti-static treatment to be effective. Do not Approvals tumble dry CE approved under PPE Directive (89/686/ECC), Category III Warnings and Limitations Certificate under Article 10, EC Type-Examination, by BTTG Testing & Certification Ltd., Notified Body Number 0338 Before use read and understand all user instructions and be sure that the product is suitable for the application and fitted correctly. Product must never Certificate under Article 11, EC quality control, issued SGS United Kingdom be altered or modified. Ltd., Notified Body Number 0120 Do not use for: Materials Contact with heavy oils, sparks or flame, or combustible liquids Environments with high mechanical risks (abrasions, tears, cuts) Suit SSMMS Polypropylene in blue or white Contact with hazardous substances beyond Type 5/6 certification Zipper Metal / Nylon / Polyester Braid Environments with conditions of excessive heat Elastic Synthetic Rubber Cuffs Polyester Thread Polyester / Cotton This product does not contain components made from natural rubber latex. SM The Power to Protect Your World4532+ Applications and Performance Typical applications may include metal grinding or Non-Hazardous Particulates Yes polishing, powder handling, oil related or greasy Hazardous Liquid Splash Yes if chemical is compatible with suit material environments, cement manufacturing, painting and coating. Non-Hazardous Liquid Splash Yes In all cases, a risk assessment should be carried out. Hazardous Liquid Spray No Always read product user information. Use limitations Hazardous Dusts and Fibres Yes and performance data should be considered to ascertain Organic Solvents No the protection required. If in doubt, contact a safety professional. Liquid Continuous Contact/Immersion No Acids/Alkalis Yes if chemical is compatible with suit material Gases and Vapours No The chemicals against which the product has been tested and certified are listed in the user instructions. For additional chemical penetration data, please call your local 3M Technical Service Representative. The table shows the performance of this product when Test Standard/Test Method Class**/ Result tested under laboratory conditions. Please note that the tests may not reflect the reality of use and do not account Abrasion resistance (visual assessment) EN 530:1994 Class 2 for factors such as excessive heat and mechanical wear. Flex cracking (visual assessment) ISO 7854:1995 Class 6 Tear resistance ISO 9073-4:1997 Class 2 Tensile strength ISO 13934-1:1999 Class 1 Puncture resistance EN 863:1995 Class 1 Resistance to ignition EN 13274-4:2001 Pass Seam strength EN ISO 13935-2:1999 Class 3 Repellency to liquids 30% H2SO4 EN ISO 6530:2005 Class 2/3 Liquid penetration resistance 30% H2SO4 EN ISO 6530:2005 Class 3/3 Repellency to liquids 10% NaOH EN ISO 6530:2005 Class 2/3 Liquid penetration resistance 10% NaOH EN ISO 6530:2005 Class 3/3 Radioactive particulates (TIL) EN 1073-2:2002 Class 1 of 3 ** The maximum Class is 6 unless otherwise noted. For additional technical data please contact 3M. For more information on 3M products and services please contact 3M. Important Notice This guide is only an outline. It should not be used as the only means for selecting protective clothing. Before using any protective clothing, the wearer must read and understand the user instructions for each product. Specific country legislation must be observed. If in doubt, contact a safety professional. Selection of the most appropriate PPE will depend on the particular situation and should only be made by a competent person knowledgeable of the actual working conditions and the limitations of PPE. Final determination as to the suitability of these products for a particular situation is the employers responsibility. This information is subject to revision at any time. Always read and follow all User Instructions supplied with your 3M Protective Coveralls in order to ensure correct operation. If you have questions contact 3M Technical Service. Personal Safety Division 3M Personal Safety Division Australia Pty Ltd 3M New Zealand Ltd Bldg A, 1 Rivett Rd 94 Apollo Drive, Rosedale North Ryde NSW 2113 Auckland 0632 Customer Service: 1300 363 565 Customer Service: 0800 252 627 TechAssist Helpline: 1800 024 464 TechAssist Helpline: 0800 364 357 3M is a trademark of 3M Company E-mail: techassist mmm.com.au Website: www.3M.com/nz/PPESafety 53OHDVH UHF FOH 0 OO ULJKWV UHVHUYHG Website: www.3M.com/au/PPESafety