Polyimide Film Tape 5413 page 1 of 2 Technical Data A tape consisting of a Kapton polyimide film and silicone adhesive designed for high temperature Product Description applications. Backing Adhesive Liner Color Standard roll Length Product Construction Kapton polyimide Silicone None Amber 36 yds (33m) film Note: The following technical information and data should be considered representative or typical only, Typical Physical and should not be used for specification purposes. Properties ASTM Test Method Adhesion to Steel: 22 oz./in. width (24 N/100mm) D-3330 Tensile Strength at Break: 33 lbs./in. width (578 N/100mm) D-3759 Elongation at Break: 62% D-3759 Backing Thickness: 1 mils (.03mm) D-3652 Total Tape Thickness: 2.7 mils (.07mm) D-3652 Temperature Use Range: -100F to 500F (-73C to 260C) General Information At room temperature, the properties of Kapton and polyimide polyester films are similar, however, as the temperature increases or decreases, the properties of the Kapton film are less affected than polyester. Kapton film does not soften at elevated temperatures, thus the film provides an excellent release surface at elevated temperatures. To obtain best performance, use this product within 12 months from date of manufacture and store under Shelf Life normal conditions of 60 to 80F (15 to 21C) and 40 to 50% R.H. in the original carton. Mask for protection of gold fingers of printed circuit boards during wave solder or solder dip process. Application Ideas Release surface in fabrication of parts cured at elevated temperatures. Features Advantages Benefits Features Thin Kapton polyimide Dimensionally stable at high Higher productivity by film temperatures reducing rework Flame retardant, chemical and Protects surfaces, helping radiation resistant reduce replacement costs Silicone adhesive High temperature performance No cleaning required/helps reduces adhesive transfer increase productivity High adhesive film bond Reduces adhesive transfer No cleaning required/helps increase productivity3M Polyimide Film Tape 5413 page 2 of 2 Technical Information and The technical information and data, recommendations, and other statements provided in this Data document are based on tests or experience which 3M believes to be reliable, but the accuracy or completeness of such information is not guaranteed. Product Use Please remember that many factors can affect the use and performance of a 3M product in a particular application. The materials to be used with the 3M product, the surface preparation of those materials, the product selected for use, the conditions in which the product is used, and the time and environmental conditions in which the product is expected to perform are among the many factors that can affect the use and performance of a 3M product. Given the variety of factors that can affect the use and performance of a 3M product, some of which are uniquely within the users knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for the users method of application. Limited Warranty and The 3M product will be free from defects in material and manufacture for a period of one (1) year from the date of manufacture. 3M MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED, Limited Remedy INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY ARISING OUT OF A COURSE OF DEALING, CUSTOM, OR USAGE OF TRADE. User is responsible for determining whether the 3M product is fit for a particular purpose and suitable for users method of application. If the 3M product is defective within the warranty period stated above, YOUR EXCLUSIVE REMEDY AND 3MS SOLE OBLIGATION SHALL BE, AT 3MS OPTION, TO REPLACE OR REPAIR THE 3M PRODUCT OR REFUND THE PURCHASE PRICE OF THE 3M PRODUCT. Limitation of Liability Except where prohibited by law, 3M will not be liable for any loss or damage arising from the 3M product, whether direct, indirect, special, incidental, or consequential, regardless of the legal theory asserted, including, but not limited to, contract, warranty, negligence, or strict liability. This Industrial Tape and Specialties Division product was manufactured under a 3M quality system registered to ISO 9002 standards. To request additional product information please call on +44 1234 229400 For Additional Information 3M United Kingdom (Bedford) 3M Ireland Hudson Road 3M House Bedford MK41 0HR Adelphi Centre Kapton is a registered England Dun Laoghaire trademark of E. I. DuPont United Kingdom Co Dublin, Ireland Please recycle. www.3M.com/interconnects Tel: +353 1 2803555 3M 2008. All rights reserved. de Nemours Co.