Technical Data September, 2010 3M Polyimide Film Tape 5413 Product Description 3M Polyimide Film Tape 5413 consists of a Kapton polyimide film and silicone adhesive designed for high temperature applications. Product Construction Backing Adhesive Liner Color Standard Roll Length Kapton Polyimide Film Silicone None Amber 36 yds. (33 m) Typical Physical Properties Note: The following technical information and data should be considered representative or typical only and should not be used for specification purposes. ASTM Test Method Adhesion to Steel: 22 oz./in. width (24 N/100 mm) D-3330 Tensile Strength at Break: 33 lbs./in. width (578 N/100 mm) D-3759 Elongation at Break: 62% D-3759 Backing Thickness: 1.0 mil (0.03 mm) D-3652 Total Tape Thickness: 2.7 mil (0.07 mm) D-3652 Temperature Use Range: -100 to 500F (-73 to 260C) Dielectric Strength: 7000 volts D-149 Outgassing: %TLM = 1.50 %CVCM = 0.50 E-595 Flame Retardancy: Pass per UL-510 product category: OANZ2 File E230409 3 3M Polyimide Film Tape 5413 Features At room temperature, the properties of Kapton and polyimide polyester films are similar, however, as the temperature increases or decreases, the properties of the Kapton film are less affected than polyester. Kapton film does not soften at elevated temperatures, thus the film provides an excellent release surface at elevated temperatures. RoHS compliant. Application Ideas Mask for protection of gold fingers of printed circuit boards during wave solder or solder dip process. Release surface in fabrication of parts cured at elevated temperatures. Key Attributes Features Advantages Benefits Thin Kapton Dimensionally stable at high temperatures No rework high productivity polyimide film Flame retardant, chemical and radiation Protects surfaces, helping reduce resistant replacement costs Silicone adhesive High temperature performance reduces No cleaning required adhesive transfer helps increase productivity High adhesive to Reduces adhesive transfer No cleaning required film bond helps increase productivity Storage Store under normal conditions of 60 to 80F (16 to 27C) and 40 to 50% R.H. in the original carton. Shelf Life To obtain best performance, use this product within 3 years from date of manufacture. (2)