Technical Data August 2016 3M Low Static Polyimide Film Tape 5433 (Linered) Product Description 3M Low Static Polyimide Film Tape 5433 is a clear PET linered version of 3M Low Static Polyimide Film Tape 5419. It is a translucent, polyimide film-backed amber silicone adhesive tape with extremely low electrostatic discharge properties. Key Features Polyimide film does not soften at elevated temperatures, thus the film provides an excellent release surface at elevated temperatures Dimensionally stable at high temperatures to help prevent rework and enable high productivity Flame retardant, chemical and radiation resistant to help protect surfaces and reduce replacement costs Silicone adhesive s high temperature performance reduces adhesive transfer to help eliminate cleaning, enabling high productivity Halogen Free* *Halogen Free is defined as having maximum 900ppm bromine, maximum 900ppm chlorine, and maximum 1500ppm total bromine and chlorine, per 61429-2-21 Key Attributes 3M Low Static Polyimide Film Tape 5433 (Linered) Features Advantages Benefits Polyimide film Dimensionally stable at high temperatures Helps promote high productivity Flame retardant and chemical resistant Protects surfaces, helping reduce replacement Silicone adhesive High temperature performance reduces Helps promote high productivity adhesive transfer Low static Virtually eliminates circuit board Helps reduce costly board waste due to degradation due to electrostatic discharge component failure Unique release liner Easy release from silicone adhesive Capability to product die cut parts Product Construction/Material Description Note: The following technical information and data should be considered representative or typical only and should not be used for specification purposes. 3M Low Static Polyimide Film Tape 5433 (Linered) Property Value Backing Material Polymide Adhesive Type Silicone Tape Color Amber Liner Clear PET Product Form Roll Standard Roll Length 36 yards (33 meters) Applications Mask for printed circuit boards during wave solder or solder dip process Used as release surface in fabrication of parts cured at elevated temperatures 3M Low Static Polyimide Film Tape 5433 (Linered) Typical Physical Properties and Performance Characteristics Note: The following technical information and data should be considered representative or typical only and should not be used for specification purposes. Final product specifications and testing methods will be outlined in the products Certificate of Analysis (COA) that is shipped with the commercialized product. 3M Low Static Polyimide Film Tape 5433 (Linered) Property Method* Value Adhesion to Steel D-3330 20 oz./in. width (22 N/100 mm) Tensile Strength at Break D-3759 33 lbs./in. width (578 N/100 mm) Elongation at Break D-3759 60% Backing Thickness D-3652 1 mil (0.03 mm) Liner Thickness D-3652 3 mil (0.08 mm) Total Tape Thickness D-3652 2.7 mil (0.07 mm) Temperature Use Range - -73 to 260C) -100 to 500F Dielectric Strength D-149 7000 volts 6 Insulation Resistance - >1*10 ohms Static Charge - (measured at 50% RH, 70F (21C) in an ESD controlled environment) Removal from Liner - <100 volts Removal from PWB - Dependent on PWB substrate, generally less than 500 volts Outgassing E-595 %TLM = 0.58 %CVCM = 0.24 Flame Retardancy per UL-510 product category: Pass OANZ2 File E230409 *Methods listed as ASTM are tested in accordance with the ASTM method noted Storage and Shelf Life The shelf life of 3M Low Static Polyimide Film Tape 5433 (Linered) is three years from the date of manufacture when stored in the original packaging materials and stored at 21C (70F) and 50% relative humidity. Certificate of Analysis (COA) The 3M Certificate of Analysis (COA) for this product is established when the product is commercially available from 3M. The commercially available product will have a COA specification established. The COA contains the 3M specifications and test methods for the products performance limits that the product will be supplied against. The 3M product is supplied to 3M COA test specifications and the COA test methods. Contact your local 3M representative for this products COA. This technical data sheet may contain preliminary data and may not match the COA specification limits and/or test methods that may be used for COA purposes. Final product specifications and testing methods will be outlined in the products Certificate of Analysis (COA) that is shipped with the commercialized product.