Scotchlok Insulation Displacement Electrical Tap Connector 560 WIRE CONNECTOR 540H Data Sheet Application Engineering Specication Use 3M Scotchlok Tap Connector 560 to Insulation Displacement Connector (as manufactured by electrically connect a (tap) wire end to a through 3M, part No. 560) capable of connecting a tap wire to 2 (run) wire, join parallel run wires, and insulate the a run wire in the range of 18-16 AWG (0,75-1,0 mm ) 2 connection. solid or stranded, and 14 AWG (1,5 mm ) stranded, tinned or untinned copper conductors. The connector Wire Range shall be UL Listed and CSA Certied for 600 Volts 2 18 -16 AWG (0,75-1,0 mm ) solid or stranded, maximum building wire: 1000 Volts maximum, 2 14 AWG (1,5 mm ) stranded, tinned or untinned signs xtures and luminaires, and have a maximum copper conductors. For use with thermoplastic insulating temperature of 105C (221F). insulated wires such as: T, TW, TFF, TFN, TFFN, Regulatory Agencies AWN, TEW, SAE-GPT, with a maximum insulation diameter of .145 inches (3,5 mm). UL Listed as a Pressure Cable Connector Tested per UL Standard 486C Maximum recommended current for general purpose UL File No. E23438 applications: 18 AWG - 7 Amps, 16 AWG - 10 Amps, Operating Temperature: 105C (221F) 14 AWG - 15 Amps Voltage Rating: 600 volts max. building wire 1000 volts max. signs and xtures Construction U-Contact - Tin plated brass, .03 in. thick (0,8 mm) CSA Certied-CSA Standard C22.2 No. 0, 188-M1983 CSA File No. LR15503 Insulator - Polypropylene Operating Temperature: 105C (221F) Color - Light blue Voltage Rating: 600 volts max. building wire UL 94-V-2 1000 volts max. signs and luminaires. Weight Flammability Rating: C22.2 No. 0.6 V-2 .0032 lb. (1,45 gm) Federal Specication W-S-610: Commercial package only Recommended Installation Tools Type Class Kind Style 3M Crimping Tool No. E-9BM 1 1 cu G 9 Linemans Pliers.19 .80 .39 .34 .53 Installation Instructions WARNING Turn power off before installing or removing terminal. All electri- cal work should be done according to appropriate electrical codes. 1. Place unstripped run wire inside run channel. 2. Insert unstripped tap wire completely. 3. Hold tool perpendicular to the wire and make the connection by crimping the u-contact down ush with the top of the plastic insulator. 4. Close top hinged cover until latched. 3M and Scotchlok are trademarks of 3M Company. is a trademark of Underwriters Laboratories. is a trademark of Canadian Standards Association. Important Notice All statements, technical information, and recommendations related to 3Ms products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3Ms current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized ofcer of 3M. Warranty Limited Remedy Limited Liability. This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3Ms option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. Electrical Markets Division 6801 River Place Blvd. Austin, TX 78726-9000 800-626-8381 Recycled paper Fax 800-828-9329 Litho in USA 40% Pre-consumer waste paper www.3M.com/electrical 10% Post-consumer waste paper 3M 2006 78-8126-5925-4-B