62 Tape Bondable PTFE Film Data Sheet Applications Product Description 3M 62 Tape is supplied on a liner bondable backside for 2.0-mil PTFE backing, supplied on a liner higher adhesion to its own backing and better bonding of Silicone thermosetting adhesive resins and varnishes for use on high temperature coils, Supplied on 3 inch cores capacitors and wire harnesses. Printable. Like all 3M insulating tapes, 3M 62 Tape is available in standard and custom widths and lengths. Standard length is 36 yards. Widths from 1/4 to 14 Longer lengths up to several times normal length, dependent upon width. Check with Customer Service. Properties Typical Values Adhesive Silicone Thermosetting Backing PTFE Film 1 Backing Thickness 2.0 Mil Total Thickness 4.0 mils/0,102mm Temperature Class 180C /356F 1 Dielectric Breakdown 9500 Volts 1 6 Insulation Resistance (megohms) >1 x 10 1 Breaking Strength 20 lbs./in. (35 n/10mm) 1 Elongation (% at break) 200 2 Electrolytic Corrosion Factor 1.0 1 Adhesion to Steel 30 oz./in. (3.2 n/10mm) Printable Yes 3 UL Flame Retardant Yes * Footnote: 1. Test method ASTM D 1000 2. 3M Test Method-Available on request 3. UL-recognized for flame retardancy per UL 510, Product Catagory 0ANZ2, File E17385.3M is a trademark of 3M. Important Notice All statements, technical information and recommendations The statements contained herein are made in lieu of all related to the Sellers products are based on information warranties, expressed or implied, including but not limited to believed to be reliable, but the accuracy or completeness the implied warranties of merchantability and fitness for a thereof is not guaranteed. Before utilizing the product, the particular purpose which warranties are hereby expressly user should determine the suitability of the product for its disclaimed. intended use. The user assumes all risks and liability whatsoever in SELLER SHALL NOT BE LIABLE TO THE USER OR ANY connection with such use. OTHER PERSON UNDER ANY LEGAL THEORY, INCLUDING BUT NOT LIMITED TO NEGLIGENCE OR Any statements or recommendations of the Seller which are STRICT LIABILITY, FOR ANY INJURY OR FOR ANY not contained in the Sellers current publications shall have DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR no force or effect unless contained in an agreement signed CONSEQUENTIAL DAMAGES SUSTAINED OR by an authorized officer of the Seller. INCURRED BY REASON OF THE USE OF ANY OF THE SELLERS PRODUCTS THAT WERE DEFECTIVE. Electrical Products Division 6801 River Place Blvd. Austin, TX 78726-9000 800 676 8381 3M 1998