Specialty Terminals L 61-SN, 62-SN, 63-SN Butt Connector, Nylon Insulated, Seamless Data Sheet Maximum Product Wire Range Barrel Barrel Insulation Number (LAWG) Thickness Length I.D. Diameter 681-SN 222-1 11.0 08.03 02.2 05.06 0.12 642-SN 126-1 11.0 00.03 05.3 05.09 0.15 603-SN 102-1 18.2 08.03 02.3 08.14 0.21 Installation Information WARNING CANADIAN STANDARDS UNDERWRITERS Turn power off before installing or removing terminal. All electrical ASSOCIATION LABORATORIES work should be done according to appropriate electrical codes. STANDARD NO. 22.2 STANDARD NO. UL 486C NO. 0, 65 3M FILE NO. E23438 3M FILE NO. LR22190 UL Listed and CSA Certified for use on stranded copper (AWG) wire only. Strip away the end 3/8 inch of wire insulation. Specifications Wire Size: See Table Above Make the crimp in the proper station of a recommended Barrel Seam: Seamless 3M crimp tool: TH-440, TH-450 (scissor styles) or Insulator Max. Volt. Rating: 600 V Building Wire TR-490 (ratchet style) hand tools. 1000 V Signs or Fixtures (Luminaires) Maximum Operating Rating: 221F (105C) Maximum Current: Same as Wire Insulator Material: Nylon Terminal Material: ETP Copper Barrel Crimp (Electrical) Terminal Plating: TinEngineering Specification Crimp-type connectors shall, electrically and mechani- The Nylon Insulated, Seamless Butt Connector shall cally, connect permanently to the pre-stripped ends of be tin-plated, annealed copper, having a double-length, two stranded copper wires. round seamless barrel, with a center stop and a close fitting nylon tube covering, color coded and sized for a The connector line shall offer barrel variations in wire specified (AWG) wire range (22-18, 16-14, 12-10). (AWG) size (22-18, 16-14, 12-10). and construction (non-insulated brazed seam, vinyl insulated butted Insulated connectors shall be UL Listed and CSA seam, nylon insulated seamless, etc.). The connector Certified for 600 volts maximum, building wire: 1000 line shall have regulatory agency coverage (UL volts maximum, signs or fixtures and temperature Listing, CSA Certification). The connectors shall be rated 221F (105C) maximum. marked with the wire range and manufacturers symbol ( ). 3M is a trademark of 3M. is a trademark of Underwriters Laboratories. is a trademark of Canadian Standards Association. IMPORTANT NOTICE Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Warranty Limited Remedy Limited Liability. This product will be free from defects in material and manufacture as of the date of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3Ms option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect, special, incidental or consequential regardless of the legal theory asserted. Electrical Products Division 6801 River Place Blvd. Austin, TX 78726-9000 Litho in USA.