3M CP2 Press-Fit Header 2 mm Type AB, 95, 110 and 125 Signal Contacts CP2 Series 25 mm basic system unit 38, 44 and 50 mm module 2 mm grid spacing allows for high signal density at low cost Eye of the Needle compliant pin press-fit design reduces manufacturing time and cost Three contact mating levels for Early Mate Late Break or Hot Swap applications reduces manufacturing time and cost Feed through termination available for midplane applications Additional grounding rows available for improved ground bounce and EMI immunity Mates with 5-row 3M HSHM, UHM, and CP2 Sockets End-to-end stackable with 5-row 3M HSHM, HM and CP2 Headers See the Regulatory Information Appendix (RIA) in the RoHS compliance section of www.3Mconnectors.com for compliance information (RIA E1 & C1 apply) Date Modified: July 16, 2015 TS-2263-B Sheet 1 of 7 Physical Insulation: Material: Glass Filled Polyester (PBT) Flammability: UL94V-0 Contact: Material: Copper Alloy Plating: See Ordering Information Mechanical Mating Force: 0.75N/PIN Withdrawl Force: 0.15N/PIN Mating and Un-mating Operations: 200 for KR plating Electrical Current Rating: 1.0 Amperes at 70C with all contacts powered Contact Resistance: 20 m Insulation Resistance: 10,000 M Test Voltage: 750 VAC RMS Environmental Temperature Ratings: -55C to 125C PCB Data Recommended PCB Plated Through Hole: 0.60.05 mm Drill hole diameter: 0.70.02 mm Hole platings: Cu 25~50m, Sn<10 m PCB thickness: 2.4 - 5.6 mm for 3.7 mm tails, 1.4 - 5.6 mm for 2.3 mm tails Press-In Force: 204N/pin on nominal hole diameter Retention Force: 13.5N/pin on nominal hole diameter 3 Electronics Materials Solutions Division For technical, sales or ordering information call Interconnect Solutions 800-225-5373 3M CP2 Press-Fit Header 2 mm Type AB, 95, 110 and 125 Signal Contacts CP2 Series Signal Contact Dimension A Dimension B Dimension C Quantity 95 38.00 1.496 38.30 1.508 36.00 1.417 110 44.00 1.732 44.30 1.744 42.00 1.653 125 50.00 1.968 50.30 1.980 48.00 1.890 mm MAX Inch Tolerance Unless Noted .0 .00 0. 1 0.3 0.13 mm Dimensions for Reference only f e d c b 2 1 a z 4 f f e e d d c c b b a a z z f e d c b a z RECOMMENDED PCB LAYOUT Ordering Information CP2-HABXXX-XXX-XXXX Number of Signal Contacts Plating Options 095,110 and125 FJ= 10 20 Gold Contact Area 100200 Matte Tin Loading Configurations 5080 Nickel Underplate (RIA E1 & C1 apply) (See diagrams on following pages) KR= 3040 Gold Contact Area Grounding Options: 100200 Matte Tin G= with ground pins 5080 Nickel Underplate Blank= without ground pins (RIA E1 & C1 apply) KV = 3040 Mate End Gold Contact area EMLB Patterns Gold Flash Tail Contact area Primary Tail Length 5080 Nickel Underplate 1= 3.7 mm (RIA E1 & C1 apply) For Primary Tail Length option 4 only 2= 2.3 mm 4= 15.8 mm This diagram serves only for Part Number descriptive definitions. For standard product configuration please see following pages. TS-2263-B Sheet 2 of 7 PLEASE CONTACT YOUR LOCAL SALES REPRESENTATIVE FOR CUSTOMER SPECIFIC PRODUCT CONFIGURATIONS. 3 Electronics Materials Solutions Division For technical, sales or ordering information call Interconnect Solutions 800-225-5373