4102 3 page 1 of 2 Cartridge/Filter 7093C, Hydrogen Fluoride, P100, with Nuisance Level * Organic Vapor and Acid Gas Relief Issue Date 9/1/09 The 3M Cartridge/Filter 7093C, Hydrogen Fluoride, P100 can be used interchangeably with the 3M Half and Full Facepiece Respirator 6000, 7000 and Ultimate FX FF-400 Series. 3M Cartridge/Filter 7093C, Hydrogen Fluoride, P100 with Nuisance Level Organic Vapor (OV) and Acid Gas (AG) Relief* NIOSH approved for Hydrogen Fluoride as well as oil and non-oil based particulates. At least 99.97% filtration efficiency against solid and 1 liquid aerosols including oils. 3M Cartridge/Filter 7093C, Hydrogen Fluoride, P100 with Nuisance Designed for higher-heat Level Organic Vapor and Acid Gas relief* applications. Improved filtering technology Suggested Applications provides reduced breathing Glass etching Aluminum resistance. smelting Chemical Unique spring-loaded cover manufacturing design simplifies negative pressure user seal checks. OSHA substance Innovati ve solid-top air-inlet specific particle design creates a channeled exposures: airflow that reduces premature Lead caking or clogging. WARNING Asbestos These filters help protect against certain particles. Cadmium Misuse may result in sickness or death. Before use, Arsenic the wearer must read and understand User Instructions provided as a part of product packaging. Time use 4,4 -Methylenedianiline limitations may apply. For proper use, see package (MDA) instructions, supervisor or call 3M OH&ESD Technical Service in U.S.A., 1-800-243-4630. In Canada, call 1-800-267-4414. Additional use instructions, 3M recommended for relief against nuisance levels of organic vapor and acid gas. Nuisance level organic * vapor and acid gas refers to concentrations not exceeding OSHA Permissible Exposure Limit (PEL) or applicable product limitations, approval government exposure limits, whichever is lower. Not NIOSH approved for organic vapors or acid gases. labels, and warnings are Do not use for respiratory protection against organic vapors or acid gases (except hydrogen fluoride). included with each facepiece References: 1. T ested against particles approximately 0.3 micron in size (mass median aerodynamic diameter) per 42 CFR 84. and filter package. 3M Cartridge/Filter 7093C, Hydrogen Fluoride, P100, 4102 page 2 of 2 with Nuisance Level Organic Vapor and Acid Gas Relief* Ordering Information Part Number Description Cartridge/Filter 7093C, hydrogen fluoride, P100 with nuisance level OV and AG relief* 7093C/37173 (AAD) 2 filters/vacuum sealed bag, 6 bags/box, 5 boxes/case = 30 pair Cartridge/Filter 7093C, hydrogen fluoride, P100 with nuisance level OV and AG relief* 7093CB (Bulk) 2 filters/vacuum sealed bag = 72 pair 3M recommended for relief against nuisance levels of organic vapor and acid gas. Nuisance level organic vapor and acid gas refers to concentrations not exceeding OSHA * Permissible Exposure Limit (PEL) or applicable government exposure limits, whichever is lower. Not NIOSH approved for organic vapors or acid gases. Do not use for respiratory protection against organic vapors or acid gases (except hydrogen fluoride). Use For: 10 times the PEL with full Time Use Limitation Solids such as those from facepiece qualitatively fit If cartridge/filter becomes processing minerals, coal, iron tested, or damaged, soiled, or breathing ore, cotton, flour, and certain 50 times the PEL with full becomes difficult, leave the other substances. facepiece quantitatively contaminated area immediately and fit tested, or replace the cartridge/filters. If used Liquid or oil based particles applicable government in environments containing only from sprays that do not also regulations, whichever oil aerosols, dispose of cartridge/ emit harmful vapors. is lower. filters after 40 hours of use or 30 Metal fumes produced from Unknown or IDLH environments. days, whichever is first. If used welding, brazing, cutting and for hydrogen fluoride, replace Important other operations involving cartridge/filters in accordance with Before using these filters, you heating of metals. an established change schedule, or must determine the following: Hydrogen Fluoride gas up to 10 earlier if smell, taste or irritation times PEL. Acid gases such as 1. The type of contaminant(s) from contaminants is detected. Sulfur Dioxide and/or Chlorine for which the respirator is below the OSHA PEL or applicable being selected. government standards, whichever 2. The concentration level is lower. For more information, please contact: of contaminant(s). 3M Occupational Health and 3. Whether the respirator can be Do Not Use For: Environmental Safety Division properly fitted on the wearers G ases and vapors other than (OH&ESD) face. Do not use with beards, hydrogen fluoride, when In the U.S., contact: other facial hair, or other concentrations exceed the OSHA Customer Service conditions that prevent a good 1-800-328-1667 PEL, or applicable government Technical Assistance seal between the face and the standards, whichever is lower, 1-800-243-4630 faceseal of the respirator. including those present in paint Website www.3M.com/OccSafety 4. Before occupational use of spray operations, unless combined For other 3M products these cartridge/filters, a written with approved chemical cartridges. 1-800-3M HELPS respiratory protection program Sandblasting. In Canada, contact: must be implemented, meeting 3M Canada Company, OH&ESD Oxygen deficient atmospheres. P.O. Box 5757 all the requirements of OSHA London, Ontario N6A 4T1 Concentrations that exceed: 29 CFR 1910.134, including Customer Care 10 times the permissible training, medical evaluation 1-800-364-3577 exposure limit (PEL) with Technical Assistance (Canada only) and fit testing. 1-800-267-4414 half facepiece, or Website www.3M.ca/safety Technical Assistance In Mexico 01-800-712-0646 Occupational Health and Environmental Safety Division 5270-2255, 5270-2119 (Mexico City only) Technical Assistance In Brazil 3M Center, Building 235-2E-91 0800-132333 St. Paul, MN 55144-1000