Specialty Terminals 70F-110-20-PB, 70F-110-32-PB L Female Quick-Slide, Vinyl Insulated with Insulation Grip Data Sheet Mates with Tab Wire Maximum 3M Product Barrel Range L Insulation Number Width x I.D. (AWG) Diameter Thickness 70F-110-20-PB 26-22 .110 x 0.20 0.63 .040 .075 70F-110-32-PB 26-22 .110 x .032 0.63 .040 .075 Specifications Installation Information Wire Size: See Table Above WARNING Barrel Seam: Butted with Insulation Grip T urn power off before installing or removing terminal. All electrical work should be done according to appropriate electrical codes. Maximum Operating Temp: 221F (105C) Maximum Current: Same as Wire For use on stranded copper wire only. Insulator Material: Vinyl Strip away the end 3/16 inch of wire insulation. Terminal Material: Brass Insulation Grip Material: Copper Make the crimp in the proper station of a recommended Plating: Tin 3M Scotchlok Crimping Tool TH-450. Barrel Crimp (Electrical) Insulation Crimp (Mechanical)Engineering Specification Crimp-Type Female Quick-Slide connectors shall, The Vinyl Insulated Miniature 0.110 Female electrically and mechanically, connect permanently Disconnect with insulation grip, shall be tin plated to a prestripped end of a stranded copper wire, and 0.010 thick brass with a tongue for gripping a 0.110 have a tongue portion with fingers which grip a Male male tab of either 0.020 or 0.032 thickness and with Disconnect in a separable, reusable manner, forming a a barrel covered by a copper insulation grip, which is Quick Connect Wiring Termination. covered by a vinyl sleeve, color coded and sized for a specified (AWG) wire range (26-22). The connector line shall offer tongue variations (sized to grip male tabs 0.110 x 0.020 or 0.110 x 0.032) and barrel variations in construction, non- insulated, vinyl insulated with insulation grip, nylon fully insulated, etc. 3M and Scotchlok are trademarks of 3M Company. Important Notice All statements, technical information, and recommendations related to 3Ms products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3Ms current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty Limited Remedy Limited Liability This product will be free from defects in material and manufacture for a period of five (5) years from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3Ms option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. 3 Electrical Markets Division 6801 River Place Blvd. Austin, TX 78726-9000 800-245-3573 Please recycle. Printed in USA. Fax 800-245-0329 3M 2007. All rights reserved. www.3M.com/electrical 78-8131-7368-5-A