3 Specialty Terminals W 71F-250-32-P, 72F-250-32-P Female Disconnect, Vinyl Insulated, Butted Seam L Data Sheet Mates with Wire Male Tab Maximum Product Range Width (W ) Barrel Barrel Insulation Number (AWG)xLThickness Length I.D. Diameter 781F-250-32-P222-107.250 x 0.0305.800.2 05.08 0.14 742F-250-32-P126-107.250 x 0.0305.800.2 05.08 0.14 Installation Information WARNING CANADIAN STANDARDS Turn power off before installing or removing terminal. All electrical UNDERWRITERS ASSOCIATION work should be done according to appropriate electrical codes. LABORATORIES STANDARD NO. 22.2 STANDARD NO. UL 486C NO. 0, 65 3M FILE NO. E70512 3M FILE NO. LR22190 UL Listed and CSA Certified for use on stranded copper (AWG) wire only. Strip away the end 3/8 inch of wire insulation. Make the crimp in the proper station of a recommended Specifications 3M crimp tool: TH-440, TH-450 (scissor style), or TR-490 (ratchet style) hand tools. Wire Size: See Table Above Barrel Seam: Butted Maximum Voltage Rating: 600 V Building Wire 1000 V signs or fixtures (Luminaires) Barrel Crimp (Electrical) Maximum Operating Temp: 221F (105C) Maximum Current: Same as Wire Insulator Material: Vinyl Terminal Material: Brass Suitable for factory installation on steel or brass tabs, UL Plating: Tin and CSA. Suitable for field application on brass tabs, strain relief is required, UL only.Engineering Specification The Vinyl Insulated 0.250 Female Disconnect shall be Crimp-Type Female Disconnect Terminals shall, tin plated 0.020 thick brass with a tongue for gripping electrically and mechanically, connect permanently to a 0.250 x 0.032 per ANSI/NEMA CD-2 and a 0.25 a prestripped end of a stranded copper wire, and have a tongue portion with fingers which grip a Male long barrel covered by a vinyl funnel entry sleeve, Disconnect in a separable, reusable manner, forming a which extends to cover the tongue, color coded and sized for a specified (AWG) wire range (22-18, 16-14). Quick Connect Wiring Termination. Insulated connectors shall be UL Listed and CSA The connector line shall offer tongue variations (sized to grip Male Tabs: 0.250 x 0.032 or 0.187 x 0.020 Certified for 600 V building wire: 1000 V signs or per ANSI/NEMA CD-2) and barrel variations in wire lighting fixtures (luminaires) and temperature rated 221F (105C) maximum. (AWG) size (22-18, 16-14, 12-10) and construction, non-insulated, vinyl insulated, nylon fully insulated, Female Disconnects shall be suitable for field or etc. The female disconnects shall have regulatory agency coverage, UL Listed and CSA Certified. The factory wiring, with a UL Recognized strain relief tongue portion shall be marked with the wire range required. and manufacturers name or trade mark ( ). 3M is a trademark of 3M Company. is a trademark of Underwriters Laboratories. is a trademark of Canadian Standards Association. IMPORTANT NOTICE Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Warranty Limited Remedy Limited Liability. This product will be free from defects in material and manufacture as of the date of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3Ms option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect, special, incidental or consequential regardless of the legal theory asserted. Electrical Products Division 6801 River Place Blvd. Austin, TX 78726-9000 Litho in USA. 3M 2003 78-8126-5530-2-B