Specialty Terminals W 71F-187-20, 72F-187-20 Female Disconnect, Non-Insulated, Butted Seam L Data Sheet Mates with Wire Male Tab Product Range Width (W ) Barrel Barrel Number (AWG)xLThickness Length I.D. 781F-187-20202-108.187 x 0.0205.505.2 0.08 742F-187-20106-108.187 x 0.0205.505.2 0.08 Installation Information WARNING UNDERWRITERS CANADIAN STANDARDS Turn power off before installing or removing terminal. All electrical LABORATORIES ASSOCIATION work should be done according to appropriate electrical codes. STANDARD NO. UL 486A STANDARD NO. C22.2 3M FILE NO. E70512 NO. 0.65 UL Listed and CSA Certified or use on stranded copper 3M FILE NO. LR22190 (AWG) wire only. Strip away the end 3/8 inch of wire insulation. Make the crimp in the proper station of a recommended 3M crimp tool: TH-440, TH-450 (scissor style), or Specifications TR-490 (ratchet style) hand tools. Wire Size: See Table Above Barrel Seam: Butted Maximum Current: Same as Wire Terminal Material: Brass Plating: Tin Barrel Crimp (Required) Suitable for factory installation on steel or brass tabs, UL and CSA. Suitable for field application on brass tabs, strain relief is required, UL only.Engineering Specification The Non-Insulated Female Disconnect shall be tin Crimp-Type Female Disconnect Terminals shall, plated 0.016 thick brass, with a tongue for gripping a electrically and mechanically connect permanently to 0.187 male tab of 0.20 thickness, and a butted seam the prestripped end of a stranded copper wire, and barrel sized for specified (AWG) wire range (22-18, have a tongue portion with fingers which grip a Male 16-14). Disconnect in a separable, reusable manner, forming a Quick Connect Wiring Termination. The connector line shall offer a tongue variations (sized to grip male tabs: 0.187 or 0.250) and barrel variations in construction, non-insulated, nylon insulated with insulation grip, etc. The tongue portion shall be marked with the wire range and manufacturers symbol ( ). 3M is a trademark of 3M Company. is a trademark of Underwriters Laboratories. is a trademark of Canadian Standards Association. IMPORTANT NOTICE Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Warranty Limited Remedy Limited Liability. This product will be free from defects in material and manufacture as of the date of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3Ms option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect, special, incidental or consequential regardless of the legal theory asserted. Electrical Products Division 6801 River Place Blvd. Austin, TX 78726-9000 Litho in USA.