Specialty Terminals W 71F-250-32, 72F-250-32 Female Disconnect, Non-Insulated, Butted Seam L Data Sheet Mates with Wire Male Tab Product Range Width (W ) Barrel Barrel Number (AWG)xLThickness Length I.D. 781F-250-32222-106.250 x 0.0305.600.2 0.08 742F-250-32126-106.250 x 0.0305.600.2 0.08 Installation Information WARNING Turn power off before installing or removing terminal. All electrical UNDERWRITERS CANADIAN STANDARDS work should be done according to appropriate electrical codes. LABORATORIES ASSOCIATION STANDARD NO. UL 486C STANDARD NO. 22.2 3M FILE NO. E70512 NO. 0, 65 3M FILE NO. LR22190 UL Listed and CSA Certified for use on stranded copper wire only. Strip away the end 1/4 inch of wire insulation. Make the crimp in the proper station of a recommended Specifications 3M crimp tool: TH-440, TH-450 (scissor style), or TR-490 (ratchet style) hand tools. Wire Size: See Table Above Barrel Seam: Butted Maximum Voltage Rating: 600 V Building Wire 1000 V signs or Barrel Crimp (Electrical) fixtures (Luminaires) Maximum Current: Same as Wire Terminal Material: Brass Plating: Tin Suitable for factory application on steel or brass tabs UL and CSA. Suitable for field application on brass tabs, strain relief required, UL only.Engineering Specification The Non-Insulated 0.250 Female Disconnect shall be Crimp-Type Female Disconnect Terminals shall, tin plated 0.020 thick brass with a tongue for gripping electrically and mechanically, connect permanently to a 0.250 Male Tab of 0.032 thickness and a butted a prestripped end of a stranded copper wire, and have a tongue portion with fingers which grip a Male seam barrel sized for a specified (AWG) wire range Disconnect in a separable, reusable manner, forming a (22-18, 16-14). Quick Connect Wiring Termination. Insulated connectors shall be UL Listed and CSA Certified for 600 V building wire: 1000 V signs or The connector line shall offer tongue variations (sized to grip Male Tabs: 0.187 x 0.250) and barrel lighting fixtures (luminaires). variations in construction, non-insulated, nylon Female Disconnects shall be suitable for field or insulated with insulation grip, etc. The tongue portion factory wiring, with a UL Recognized strain relief shall be marked with the wire range and required. manufacturers symbol ( ). 3M is a trademark of 3M Company. is a trademark of Underwriters Laboratories. is a trademark of Canadian Standards Association. IMPORTANT NOTICE Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Warranty Limited Remedy Limited Liability. This product will be free from defects in material and manufacture as of the date of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3Ms option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect, special, incidental or consequential regardless of the legal theory asserted. Electrical Products Division 6801 River Place Blvd. Austin, TX 78726-9000 Litho in USA. 3M 2003 78-8126-5539-3-B