Specialty Terminals W 71F-250-32-NBL, 72F-250-32-NBL W Female Disconnect, Nylon Fully Insulated D L with Insulation Grip Data Sheet Mates with Wire Male Tab Maximum Product Range Width (W ) Barrel Barrel Insulation Number (AWG)xLThickness WD Length I.D. Diameter 781F-250-32-NBL222-107.250 x 0.03 07.803.305.200.205.08 0.14 742F-250-32-NBL126-107.250 x 0.03 07.803.305.200.205.08 0.14 Installation Information WARNING Turn power off before installing or removing terminal. All electrical CANADIAN STANDARDS UNDERWRITERS work should be done according to appropriate electrical codes. ASSOCIATION LABORATORIES STANDARD NO. 22.2 STANDARD NO. UL 486C NO. 0, 65 3M FILE NO. E70512 3M FILE NO. LR22190 UL Listed and CSA Certified for use on stranded copper (AWG) wire only. Strip away the end 3/8 inch of wire insulation. Make the crimp in the proper station of a recommended Specifications 3M crimp tool: TH-440, TH-450 (scissor style), or Wire Size: See Table Above TR-482, TR-490 (ratchet style) hand tools. Barrel Seam: Butted, with Insulation Grip Maximum Voltage Rating: 600V Building Wire 1000 V Signs or Barrel Crimp (Electrical) Lighting Fixtures (Luminaires) Insulation Crimp (Mechanical) Maximum Operating Temp: 221F (105C) Maximum Current: Same as Wire Insulator Material: Nylon Terminal Material: Brass Suitable for factory installation on steel or brass tabs, UL Insulation Grip Material: Brass and CSA. Plating: Tin Suitable for field application on brass tabs, strain relief is required.Engineering Specification Crimp-Type Female Disconnects shall, electrically and The Nylon Fully Insulated Female Disconnect, with mechanically, connect permanently to a prestripped insulation grip, shall be tin plated 0.020 thick brass end of a stranded copper wire, and have a tongue with a tongue for gripping a 0.250 x 0.032 Male Tab portion with fingers which grip a Male Disconnect in a per ANSI/NEMA CD-2 and a 0.25 long barrel with a separable, reusable manner, forming a Quick Connect tin plated brass funnel entry insulation grip, covered Wiring Termination. by a molded nylon sleeve, which extends to cover the tongue, color coded and sized for a specified (AWG) The connector line shall offer tongue variations (sized wire range (22-18, 16-14). to 0.250 x 0.032 or 0.187 x 0.020 per ANSI/NEMA CD-2) and construction, non-insulated, vinyl insulated Insulated connectors shall be UL Listed and CSA and nylon fully insulated insulated, etc. The Female Certified for 600 V building wire: 1000V signs or Disconnects shall have regulatory agency coverage, lighting fixtures (luminaires) and temperature rated UL Listing, CSA Certification. The tongue portion 221F (105C) maximum. shall be marked with the wire range and Female Disconnects shall be suitable for field or manufacturers symbol ( ). factory wiring, with a UL Recognized strain relief required. 3M is a trademark of 3M Company. is a trademark of Underwriters Laboratories. is a trademark of Canadian Standards Association. IMPORTANT NOTICE Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Warranty Limited Remedy Limited Liability. This product will be free from defects in material and manufacture as of the date of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3Ms option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect, special, incidental or consequential regardless of the legal theory asserted. Electrical Products Division 6801 River Place Blvd. Austin, TX 78726-9000 Litho in USA. 3M 2003 78-8126-5522-9-B