Specialty Terminals W 71M-187-20, 72M-187-20 Male Disconnect, Non-Insulated, Butted Seam L Data Sheet Male Tab Product Wire Range Width (W ) Barrel Barrel Number (AWG)xLThickness Length I.D. 781M-187-20202-104.187 x 0.0204.6 00.2 0.08 742M-187-20106-104.187 x 0.0204.6 00.2 0.08 Installation Information WARNING UNDERWRITERS CANADIAN STANDARDS Turn power off before installing or removing terminal. All electrical LABORATORIES ASSOCIATION work should be done according to appropriate electrical codes. STANDARD NO. UL 310 STANDARD NO. C22.2 3M FILE NO. E70512 NO. 153 3M FILE NO. LR22190 UL Listed and CSA Certified for use on stranded copper (AWG) wire only. Strip away the end 3/8 inch of wire insulation. Specifications Make the crimp in the proper station of a recommended Wire Size: See Table Above 3M crimp tool: TH-440, TH-450 (scissor style), or Barrel Seam: Butted Maximum Voltage Rating: 600 V Building Wire TR-490 (ratchet style) hand tools. 1000 V Signs or Fixtures (Luminaires) Maximum Current: Same as Wire Terminal Material: ETP Copper Barrel Crimp (Required) Plating: Tin Suitable for factory application on steel or brass tabs UL or CSA. Suitable for field application on brass tabs, strain relief required, UL only.Engineering Specification Crimp-Type Male Quick Disconnect shall, electrically The Male Quick Disconnect shall be tin plated 0.020 and mechanically connect permanently to a prestripped thick copper, with a 0.187 blade conforming to end of a stranded copper wire and, have a flat rectangular ANSI/NEMA DC-2 dimensions and a 0.24 long barrel tongue portion for mating to a Female Quick Disconnect sized for a specified (AWG) wire range (22-18, 16-14). in a separable, reusable manner, forming a Quick Connect Wiring Connection. Non-insulated connectors shall be UL Listed and CSA Certified for 600 volts maximum, building wire: 1000 The connector line shall offer tongue variations (size volts maximum, signs and fixtures (luminaires). 0.250 x 0.032 or 0.187 x 0.020 per ANSI/NEMA DC-2) and barrel variations in wire size 22-18 AWG, 16-14 Quick Disconnect connectors shall be suitable for field or AWG, 12-10 AWG and construction of non-insulated, factory wiring, with a UL Recognized strain relief vinyl insulated, nylon fully insulated, etc. required. The Quick Disconnect shall have regulatory agency coverage (UL Listing, CSA Certification). The tongue shall be marked with the wire range and the manufacturers symbol ( ). 3M is a trademark of 3M. is a trademark of Underwriters Laboratories. is a trademark of Canadian Standards Association. IMPORTANT NOTICE Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Warranty Limited Remedy Limited Liability. This product will be free from defects in material and manufacture as of the date of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3Ms option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect, special, incidental or consequential regardless of the legal theory asserted. Electrical Products Division 6801 River Place Blvd. Austin, TX 78726-9000 Litho in USA. 3M 2002 78-8126-0730-3-A