Specialty Terminals 73F-250-32-NBL Female Disconnect, Nylon Fully Insulated L with Insulation Grip, Interlock Barrel Data Sheet Mates with Wire Male Tab Maximum Product Range Width (W ) Barrel Barrel Insulation Number (AWG)xLThickness Length I.D. Diameter 703F-250-32-NBL122-104.250 x 0.0305.905.2 00.16 0.25 Installation Information WARNING Turn power off before installing or removing terminal. All electrical UNDERWRITERS CANADIAN STANDARDS work should be done according to appropriate electrical codes. LABORATORIES ASSOCIATION STANDARD NO. UL 486C STANDARD NO. 22.2 3M FILE NO. E70512 NO. 0, 65 UL Listed and CSA Certified for use on stranded 3M FILE NO. LR22190 copper (AWG) wire only. Strip away the end 3/8 inch of wire insulation. Make the crimp in the proper station of a recommended 3M crimp tool: TH-440, TH-450 (scissor style), or Specifications TR-482, TR-490 (ratchet style) hand tools. Wire Size: See Table Above Barrel Seam: Interlock with Insulation Grip Barrel Crimp (Electrical) Maximum Voltage Rating: 600 V Building Wire 1000 V signs or Insulation Crimp (Mechanical) fixtures (Luminaires) Maximum Operating Temp: 221F (105C) Maximum Current: Same as Wire Suitable for factory installation on steel or brass tabs, UL Insulator Material: Nylon and CSA. Terminal Material: Brass Insulator Grip Material: Brass Suitable for field application on brass tabs, strain relief is Plating: Tin required, UL only.Engineering Specification Crimp-Type Female Disconnect shall, electrically and The Nylon Fully Insulated 0.250 Female Disconnect mechanically, connect permanently to the prestripped with Insulation Grip and interlocking barrel shall be end of a stranded copper wire, and have a tongue tin plated 0.020 thick brass with a tongue for gripping portion with fingers which grip a Male Disconnect in a a 0.250 x 0.032 Male Tab per ANSI/NEMA CD-2 separable, reusable manner, forming a Quick Connect and a 0.25 long barrel with a tin plated brass funnel Wiring Termination. entry insulation grip, covered by a molded nylon sleeve, color coded and sized for a specified (AWG) The connector line shall offer tongue variations (sized wire range (22-18, 16-14, 12-10). to 0.250 x 0.032 or 0.187 x 0.020) and barrel variations in wire (AWG) size (22-18, 16-14, 12-10) Insulated connectors shall be UL Listed and CSA and construction, non-insulated, vinyl insulated, nylon Certified for 600 V building wire: 1000 V signs or fully insulated, etc. The female disconnect shall have lighting fixtures (luminaires) and temperature rated regulatory agency coverage, UL Listed, CSA 221F (105C) maximum. Certification. The tongue portion shall be marked with Female Disconnects shall be suitable for field or the wire range and manufacturers symbol ( ). factory wiring, with a UL Recognized strain relief required. 3M is a trademark of 3M Company. is a trademark of Underwriters Laboratories. is a trademark of Canadian Standards Association. IMPORTANT NOTICE Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Warranty Limited Remedy Limited Liability. This product will be free from defects in material and manufacture as of the date of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3Ms option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect, special, incidental or consequential regardless of the legal theory asserted. Electrical Products Division 6801 River Place Blvd. Austin, TX 78726-9000 Litho in USA. 3M 2003 78-8126-5524-5-B