7630803102 3M

3M Pin Strip Header Single and Dual Row .100, .235/.318 Mating Length, Straight & Right Angle, Solder Tails 929 Series Stackable Gold, Matte Sn, or Tin-Lead plating options High Temperature (PCT) plastic for Wave or IR soldering Solder stand-off for wave soldering Board pin retention feature option See Regulatory Information Appendix (RIA) for chemical compliance information Date Modifi ed: November 6, 2008 TS-0769-E Sheet 1 of 4 Physical Insulation: Material: Glass Filled Polyester (PBT) or High Temperature (PCT) Flammability: UL 94V-0 Color: Black Contact: Material: Copper Alloy Plating: Underplating: 50 1.27 m Nickel Wiping Area and Solder Tails: See ordering information (Gold, Matte Tin, Tin-Lead options) Marking: None Electrical Current Rating: 2.5 A 9 Insulation Resistance: > 5 10 at 500 V DC Withstanding Voltage: 1500 V at Sea Level RMS Environmental -40C to +105C Temperature Rating: 260C (per J-STD-020C) for PCT parts only Process Rating: (PBT insulator version), maximum insulator temperature 191C (Solder Wave Process Only) Level 1 (per J-STD-020C) for PCT parts Moisture Sensitivity Level: UL File No.: E68080 3M is a trademark of 3M Company. 3 For technical, sales or ordering information call Electronic Solutions Division 800-225-5373 Interconnect Solutions 3M Pin Strip Header Single and Dual Row .100, .235/.318 Mating Length, Straight & Right Angle, Solder Tails 929 Series C PCB Edge 0.1000.003 2x .050 Max 2.54 .015 1.27 0.075.005 1.91 0.0400.003 0.115 1.02 2.92 AFTER PLATING 0.170 Min 4.32 RIGHT ANGLE SOLDER WRAP .070.010 TAILS 1.78 0.100.003 0.060 2.54 .008 1.52 0.040.003 1.02 AFTER PLATING.015 0.100 STRAIGHT 0.100 2.54 SOLDER WRAP 2.54 TYP TAILS 0.0250.001 SQ. TYP. 0.64 RECOMMENDED HOLE PATTERN 0.100 PCB EDGE .015 0.100.003 2.54 0.0750.005 0.170 2.54 1.91 .215 5.46 0.100 2.54 0.100 0.0700.005 2.54 1.78 0.040.003 1.02 AFTER PLATING 0.100 2.54 2x .050 Max. 0.060 1.27 1.52 0.100.003 0.040.003 0.100 2.54 1.02 2.54 .008 AFTER PLATING 0.100 2.54 .015 STRAIGHT WIREWRAP TAILS 0.0250.001 SQ. TYP. 0.100 TYP. 0.640 2.54 0.100 RECOMMENDED HOLE PATTERN Inch mm Tolerance Unless Noted .00 .000 .0 .1 .01 .005 inch Dimensions for Reference only Notes: 1. Dimension C is a maximum when the pin strip is cut to length, not when the strip is broken to length. 2. Board pin retention feature available: change from 9X9 to 9R9 when ordering. TS-0769-E 3. Breaking of dual row parts is not recommended. Sheet 2 of 4 3M is a trademark of 3M Company. 3 For technical, sales or ordering information call Electronic Solutions Division 800-225-5373 Interconnect Solutions