3 General Purpose Vinyl Tape 764 Technical Data April, 2014 Product Description 3M General Purpose Vinyl Tape 764 can be used in non-critical applications such as color coding, bundling and safety marking, etc. Backing Adhesive Color Standard Roll Length Product Construction Polyvinyl Rubber Yellow, white, red, Yellow, red and white: chloride black, blue, 1 , 2 , 3 , 50 x 36 yds. transparent, green, (25 mm, 50 mm, 75 mm, 1250 mm* x 33 m) orange, purple, All other colors: 1 , 2 , 50 x 36 yds. gray, brown (25 mm, 50 mm, 1250 mm* x 33 m) *Log rolls are untrimmed, approximately 49 usable material. Typical Physical Note: The following technical information and data should be considered representative or typical only and should not be used for specification purposes. Properties ASTM Test Method Adhesion to Steel: 18 oz./in. width (21 N/100 mm) D-3330 Tensile Strength at Break: 13 lbs./in. width (228 N/100 mm) D-3759 Elongation at Break: 180% D-3759 Total Tape Thickness: 5.0 mils (0.125 mm) nominal D-3652 Temperature Use Range: 60 to 85F (16 to 29C) Features While vinyl tapes resist most common solvents, care should be taken to avoid ketones, chlorinated hydrocarbons and esters found in lacquers, thinners, degreasers, paint strippers, etc., which may cause the backing to swell or curl. Pigmented vinyl backing to conform to many irregular surfaces. Rubber adhesive for good instant adhesion. Application Techniques Best results are attained when applied to a clean, dry surface at temperatures between 60 to 80F (16 to 27C). 3M General Purpose Vinyl Tape 764 Application Ideas General purpose holding and color coding. Temporary marking of parts or machines. Protect parts, equipment or products from abrasion. Storage Store under normal conditions of 60 to 80F (16 to 27C) and 40 to 60% R.H. in the original carton. Shelf Life To obtain best performance, use this product within 18 months from date of manufacture. The technical information, recommendations and other statements contained in this document are Technical Information based upon tests or experience that 3M believes are reliable, but the accuracy or completeness of such information is not guaranteed. Many factors beyond 3Ms control and uniquely within users knowledge and control can affect the use Product Use and performance of a 3M product in a particular application. Given the variety of factors that can affect the use and performance of a 3M product, user is solely responsible for evaluating the 3M product and determining whether it is fit for a particular purpose and suitable for users method of application. Unless an additional warranty is specifically stated on the applicable 3M product packaging or product Warranty, literature, 3M warrants that each 3M product meets the applicable 3M product specification at the time Limited Remedy, 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR and Disclaimer IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. If the 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3Ms option, replacement of the 3M product or refund of the purchase price. Except where prohibited by law, 3M will not be liable for any loss or damage arising from the 3M product, Limitation of Liability whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability. 3 Industrial Adhesives and Tapes Division 3M Center, Building 225-3S-06 Recycled Paper 3M is a trademark of 3M Company. St. Paul, MN 55144-1000 40% pre-consumer Printed in U.S.A. 800-362-3550 877-369-2923 (Fax) 10% post-consumer 3M 2014 (4/14) www.3M.com/industrial