4 3 2 1 NOTES TM 3M ROUND CONDUCTOR FLAT, 1 MATERIALS: CONDUCTORS: 30 AWG SOLID TIN PLATED COPPER CONTROLLED IMPEDANCE CABLE, 7700 SERIES INSULATION: POLYOLEFIN COVERING: ALUMINUM FOIL & POLYESTER .025 30 AWG SOLID COVERED 2 EXAMPLE OF A DIFFERENTIAL PAIR PERFORMANCE: TM PINOUT USING 3M RIBBON CABLE DIFFERENTIAL IMPEDANCE: 95 5 Ohms SOCKET, .05 X .05 PITCH, 451 SERIES IDC CONNECTOR, P/N: 45114-0X00-XX: DIFFERENTIAL INSERTION LOSS: < 3 dB/m AT 2.5 GHz TYP. D D GGSSGGSSGGSSGG 9 INSULATION RESISTANCE: >1 x 10 Ohms AT 500 VDC NOTE: EDGE WIRES ARE DESIGNATED AS GROUNDS. UL VOLTAGE RATING: 30V AC HORIZONTAL FLAME FOR 3 CABLE PRINT CODE: UL FLAMMABILITY RATING: INTERNAL WIRING 77XX/XX 30 AWG TIN RUN ID UL WITHSTANDING VOLTAGE: 750VAC AT SEA LEVEL RMS 4 BEFORE TERMINATING TO AN IDC UL TEMPERATURE RATING: +80 C CONNECTOR, COVERING MUST BE REMOVED TO PREVENT IDC SHORTING TO FOIL. 5 AVAILABLE IN STANDARD 100 FT. PLEASE .037 0.94 SPECIFIY WHEN ORDERING. PLEASE .025 0.64 CONTACT YOUR LOCAL 3M SALES TYP TYP REPRESENTATIVE FOR ADDITIONAL CONDUCTOR COUNTS. 6 THE SURFACE OF THE RIBBON CABLE HAS A METALLIC APPEARANCE BUT IS NOT .0295 .001 CONDUCTIVE. THERE IS A TRANSLUCENT POLYESTER OUTER LAYER OVER AN ALUMINUM FOIL LAYER, WHICH GIVES THIS APPEARANCE. C C 7 THE CABLE CONSTRUCTION HAS A THIN CONDUCTIVE ALUMINUM LAYER AT EACH SEE DETAIL A EDGE. USER SHOULD EVALUATE ITS USE IN THEIR APPLICATION AND, IF NECESSARY, INSULATING TAPE MAY BE DIM APPLIED TO COVER THE ALUMINUM LAYER, AS USER DEEMS APPROPRIATE. DIM TYP 8 REGULATORY INFORMATION: ROHS COMPLIANT. VISIT WWW.3M.COM/REGS FOR COMPLIANCE INFORMATION. PRIMARY CABLE TABLE 1 NUMBER OF DIM. COVERING DIM. CONDUCTORS .010 .225 .006 0.300 10 5.72 0.15 7.62 CONDUCTOR: 30 AWG SOLID .325 .006 0.400 14 8.26 0.15 10.16 B B .375 .006 0.450 INSULATION THICKNESS: 16 9.53 0.15 11.43 .0085 TYP D 80113 AUG 30,2018 SBCO JV .475 .006 0.550 20 REMOVED 100pos AND 12.07 0.15 13.97 CHANGED FLAME RATING FROM FT2 .725 .009 0.800 30 COVERING 18.42 0.23 20.32 C 74293 JUN 14,2017 SBC FR 1.225 .009 1.300 PRODUCT LAUNCH 50 31.12 0.23 33.02 B 72021 FEB 28,2017 SBC JV DETAIL A UPDATED TO NEW DESIGN SCALE 40:1 A 69905 SEP 20,2016 LDS SBC DIMENSIONS: INCHES MM WORK REQUEST 12281 MM IS REF ONLY INITIAL RELEASE ORDERING INFORMATION DESIGN REFERENCE NEXT ASSEMBLY REV ECO ISSUE DATE AND DESCRIPTION DRFT CHKD 7700/XX XX ACCESS DRFT DATE MFG DATE CODES L SCHMIDT AUG 23,2016 CHKD DATE APPVL DATE S CLATANOFF SEP 13,2016 BLANK: STANDARD PRIMARY CABLE DIVISION DIVISION CODE C 3M COPYRIGHT 2018 SF: SPLICE FREE 3M Center 0: 30 AWG SOLID 0.025 PITCH This document and the information it contains are 3M property and may not be reproduced or further St. Paul, SCALE TOLERANCES DO NOT distributed without 3M permission, or used or EXCEPT AS MN 55144 disclosed other than for 3M authorized purposes. 20 SCALE All rights reserved. NOTED A A 1 DRAWING TITLE NUMBER OF CONDUCTORS: INCHES .0 .1 (SEE TABLE 1) ROUND CONDUCTOR FLAT, .00 .02 .000 .005 3M ELECTRONICS MATERIALS SOLUTIONS DIVISION CNTRL IMPEDANCE 7700 THIRD ANGLE PROJECTION .0000 .0002 R INTERCONNECT SOLUTIONS MILLIMETERS INTERPRET PER 4 3 2 1 TM 3M ROUND CONDUCTOR FLAT, CONTROLLED IMPEDANCE CABLE, 7700 SERIES .025 30 AWG SOLID COVERED D D Technical Information: The technical information, recommendations and other statements contained in this document are based upon tests or experience that 3M believes are reliable, but the accuracy or completeness of such information is not guaranteed. Product Use: Many factors beyond 3M s control and uniquely within user s knowledge and control can affect the use and performance of a 3M product in a particular application. Given the variety of factors that can affect the use and performance of a 3M product, user is solely responsible for evaluating the C C 3M product and determining whether it is fit for a particular purpose and suitable for user s method of application. Warranty, Limited Remedy, and Disclaimer: Unless an additional warranty is specifically stated on the applicable 3M product packaging or product literature, 3M warrants that each 3M product meets the applicable 3M product specification at the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. If the 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M s option, replacement of the 3M product or refund of the purchase price. Limitation of Liability: Except where prohibited by law, 3M will not be liable for any loss or damage arising from the 3M product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability. B B D 80113 AUG 30,2018 SBCO JV REMOVED 100pos AND CHANGED FLAME RATING FROM FT2 C 74293 JUN 14,2017 SBC FR PRODUCT LAUNCH B 72021 FEB 28,2017 SBC JV UPDATED TO NEW DESIGN A 69905 SEP 20,2016 LDS SBC WORK REQUEST 12281 INITIAL RELEASE DESIGN REFERENCE NEXT ASSEMBLY REV ECO ISSUE DATE AND DESCRIPTION DRFT CHKD ACCESS DRFT DATE MFG DATE CODES L SCHMIDT AUG 23,2016 CHKD DATE APPVL DATE S CLATANOFF SEP 13,2016 DIVISION DIVISION CODE C 3M COPYRIGHT 2018 3M Center This document and the information it contains are 3M property and may not be reproduced or further St. Paul, SCALE TOLERANCES DO NOT distributed without 3M permission, or used or EXCEPT AS MN 55144 disclosed other than for 3M authorized purposes. 1 SCALE All rights reserved. NOTED A A 1 DRAWING TITLE INCHES .0 .1 ROUND CONDUCTOR FLAT, .00 .02 .000 .005 3M ELECTRONICS MATERIALS SOLUTIONS DIVISION CNTRL IMPEDANCE 7700 THIRD ANGLE PROJECTION .0000 .0002 INTERCONNECT SOLUTIONS MILLIMETERS INTERPRET PER