3M CP2 Press-Fit Socket 2 mm Type A 110 Signal Contacts Right Angle CP2 Series 25 mm basic system unit 50 mm module Designed according to IEC 61076-4-101 and IEC 60352-5 Standards 2 mm grid spacing allows for high signal density at low cost Eye of the Needle compliant pin press-fit design reduces manufacturing time and cost Additional grounding row available for improved ground bounce and EMI immunity Mates with 5 row 3M HM, and CP2 Headers End-to-end stackable with 5 row 3M HSHM, UHM, and CP2 Sockets See the Regulatory Information Appendix (RIA) in the RoHS compliance section of www.3Mconnectors.com for compliance information (RIA E1 & C1 apply) Date Modified: July 16, 2015 TS-2266-B Sheet 1 of 2 Physical Insulation: Material: High Temperature Thermoplastic (LCP) Flammability: UL94V-0 Contact: Material: Copper Alloy Plating: See Ordering Information Mechanical Mating Force: 0.75N/PIN Withdrawl Force: 0.15N/PIN Mating and Un-mating Operations: 200 for KR plating Electrical Current Rating: 1.0 Amperes at 70C with all contacts powered Contact Resistance: 20 m Insulation Resistance: 10,000 M Test Voltage: 750 VAC RMS Environmental Temperature Ratings: -55C to +125C PCB Data Recommended PCB Plated Through Hole: 0.60.05 mm Drill Hole Diameter: 0.70.02 mm Hole platings: Cu 25~50 m, Sn<10 m PCB thickness: 1.4 - 4.2 mm Press-In Force: 204N/pin on nominal hole diameter Retention Force: 13.5N/pin on nominal hole diameter 3 Electronics Materials Solutions Division For technical, sales or ordering information call Interconnect Solutions 800-225-5373 3M CP2 Press-Fit Socket 2 mm Type A 110 Signal Contacts Right Angle CP2 Series mm Inch Tolerance Unless Noted .0 .00 0. 0.13 1 0.3 mm Dimensions for Reference only Recommended PCB Layout Ordering Information CP2-SA110-X1-XXXX Shield Options G= Upper Shield Blank= No Shield Plating Options FJ= 10~20 Gold Contact Area 100~200 Matte Tin 50~80 Nickel Underplate (RIA E1 & C1 apply) KR= 30~40 Gold Contact Area 100~200 Matte Tin 50~80 Nickel Underplate (RIA E1 & C1 apply) This diagram serves only for Part Number descriptive definitions. TS-2266-B PLEASE CONTACT YOUR LOCAL SALES REPRESENTATIVE FOR CUSTOMER SPECIFIC PRODUCT CONFIGURATIONS. Sheet 2 of 2 3 Electronics Materials Solutions Division For technical, sales or ordering information call Interconnect Solutions 800-225-5373