3M CP2 Press-Fit Header 2 mm Type B, 95, 110 and 125 Signal Contacts CP2 Series 25 mm basic system unit 38, 44 and 50 mm module 2 mm grid spacing allows for high signal density at low cost Eye of the Needle compliant pin press-fit design helps reduce manufacturing time and cost Three contact mating levels for Early Mate Late Break or Hot Swap applications help reduce manufacturing time and cost Feed through termination available for midplane applications Additional grounding rows available for improved ground bounce and EMI immunity Mates with 5 row 3M HSHM, UHM and CP2 Sockets End to end stackable with 5 row 3M HSHM, HSM, HM, and CP2 Headers See the Regulatory Information Appendix (RIA) in the RoHS compliance section of www.3Mconnectors.com for compliance information. (RIA E1 & C1 apply) Date Modified: July 16, 2015 TS-2267-C Sheet 1 of 7 Physical Insulation: Material: Glass Filled Polyester (PBT) Flammability: UL94V-0 Contact: Material: Copper Alloy Plating: See Ordering Information Mechanical Mating Force: 0.75N/PIN Withdrawl Force: 0.15N/PIN Mating and Un-mating Operations: 200 for KR plating Application: This module is not suitable for stand-alone use. (Refer to IEC-61076-4-101) Electrical Current Rating: 1.0 Amperes at 70C with all contacts powered Contact Resistance: 20 m Insulation Resistance: 10,000 M Test Voltage: 750 VAC RMS Environmental Temperature Ratings: -55C to +125C PCB Data Recommended PCB Plated Through Hole: 0.60.05 mm Drill Hole Diameter: 0.70.02 mm Hole platings: Cu 25~50 m, Sn<10 m PCB thickness: 2.4 - 5.6 mm for 3.7 mm tails, 1.4 - 5.6 mm for 2.3 mm tails Press-In Force: 204N/pin on nominal hole diameter Retention Force: 13.5N/pin on nominal hole diameter 3M is a trademark of 3M Company. 3 For technical, sales or ordering information call Electronics Materials Solutions Division 800-225-5373 Interconnect Solutions 3M CP2 Press-Fit Header 2 mm Type B, 95, 110 and 125 Signal Contacts CP2 Series Signal Contact Dimension A Dimension B Dimension C Quantity 95 38.00 38.30 36.00 110 44.00 44.30 42.00 125 50.00 50.30 48.00 MAX mm Inch Tolerance Unless Noted Matinglength 00 .00 mm 1 0.3 0.13 Tail length Dimensions for Reference only f MATING e LENGTH 5 d 1 2 c b a z 2.3 3.7 0.09 0.15 TAIL LENGTH 15.8 PLATED HOLES 0.62 f e d c b a z Recommended PCB Layout Ordering Information CP2-HBXXX-XXX-XXXX Number of Signal Contacts 095, 110, 125 Grounding Options: G= with ground pins Plating Options Blank= without ground pins FJ= 10~20 Gold Contact Area 100~200 Matte Tin 50~80 Nickel Underplate Loading Configurations and EMLB Patterns (RIA E1 & C1 apply) (see diagrams on following pages KR= 30~40 Gold Contact Area 100~200 Matte Tin 50~80 Nickel Underplate (RIA E1 & C1 apply) Primary Tail Length KV = 30-40 Mate End Gold Contact area 1= 3.7 mm Gold Flash Tail Contact area 2= 2.3 mm 50-80 Nickel Underplate 4= 15.8 mm (RIA E1 & C1 apply) For Primary Tail Length Option 4 only This diagram serves only for Part Number descriptive definitions. For standard product configuration please see following pages. PLEASE CONTACT YOUR LOCAL SALES REPRESENTATIVE FOR CUSTOMER SPECIFIC PRODUCT CONFIGURATIONS. TS-2267-C Sheet 2 of 7 3M is a trademark of 3M Company. 3 For technical, sales or ordering information call Electronics Materials Solutions Division 800-225-5373 Interconnect Solutions