3M CP2 Press-Fit Socket
2 mm Type AB, 95, 110 and 125 Signal Contacts Right Angle CP2 Series
25 mm basic system unit
38, 44 and 50 mm module
Designed according to IEC 61076-4-101 and IEC 60352-5
Standards
2 mm grid spacing allows for high signal density at low cost
Eye of the Needle compliant pin press-fit design reduces
manufacturing time and cost
Additional grounding row available for improved ground bounce
and EMI immunity
Mates with 5-row 3M HM and CP2 Headers
End-to-end stackable with 5-row 3M HSHM, UHM and
CP2 Sockets
See the Regulatory Information Appendix (RIA) in the RoHS
compliance section of www.3Mconnectors.com for compliance
information (RIA E1 & C1 apply)
Date Modified: July 16, 2015 TS-2264-C
Sheet 1 of 2
Physical
Insulation:
Material: High Temperature Thermoplastic (LCP)
Flammability: UL94V-0
Contact:
Material:
Copper Alloy
Plating: See Ordering Information
Mechanical
Mating Force: 0.75N/PIN
Withdrawl Force: 0.15N/PIN
Mating and Un-mating Operations: 200 for KR plating
Electrical
Current Rating: 1.0 Amperes at 70C with all contacts powered
Contact Resistance: 20 m
Insulation Resistance: 10,000 M
Test Voltage: 750 VAC
RMS
Environmental
Temperature Ratings: -55C to +125C
PCB Data
Recommended PCB Plated Through Hole: 0.60.05 mm
Drill hole diameter: 0.70.02 mm
Hole platings: Cu 25~50 m, Sn<10 m
PCB thickness: 1.4 - 4.2 mm
Press-In Force: 204N/pin on nominal hole diameter
Retention Force: 13.5N/pin on nominal hole diameter
3M is a trademark of 3M Company.
3
For technical, sales or ordering information call
Electronics Materials Solutions Division
800-225-5373
Interconnect Solutions
3M CP2 Press-Fit Socket
2 mm Type AB, 95, 110 and 125 Signal Contacts Right Angle CP2 Series
DIM A Max
DIM A Max
mm
[Inch]
Tolerance Unless Noted
0. .0 .00
mm 1 0.3 0.13
DIM B
DIM B
[ ] Dimensions for
Reference only
DIM A
DIM A
Signal
Contact Dimension A Dimension B
Quantity
38.00 36.00
95
[1.496] [1.417]
44.00 42.00
110
[1.732] [1.653]
50.00 48.00
125
[1.968] [1.890]
RECOMMENDED PCB LAYOUT
Ordering Information
CP2-SABXXX-X1-XXXX
Plating Options
Number of Signal Contacts:
FJ= 1020 Gold Contact Area
095,110 and 125
100200 Matte Tin
5080 Nickel Underplate
(RIA E1 & C1 apply)
Shield Options:
KR= 3040 Gold Contact Area
100200 Matte Tin
G= Upper Shield
5080 Nickel Underplate
Blank= No Shield
(RIA E1 & C1 apply)
This diagram serves only for Part Number descriptive definitions.
TS-2264-C
PLEASE CONTACT YOUR LOCAL SALES REPRESENTATIVE FOR CUSTOMER SPECIFIC PRODUCT CONFIGURATIONS.
Sheet 2 of 2
3M is a trademark of 3M Company.
3
For technical, sales or ordering information call
Electronics Materials Solutions Division
800-225-5373
Interconnect Solutions