3M Round, Shielded/Jacketed, Flat Cable .050 28 AWG Stranded, Mass Terminatable, PVC/PVC 3659 Series Round construction permits easier routing 28 AWG wire on .050 inch pitch permits mass termination to broad line of IDC connectors Continuous split/bond repeat allows for mass termination on 2.4 inch centers (approximate) Primary cable is zippable for branching or discrete terminations Meets external wiring requirements of National Electrical Code, Article 725 (CL2) UL listed for USA and Canadian markets Dual shielding provides 35 db average shielding effectiveness RoHS* Compliant Date Modified: April 13, 2007 TS-0083-18 Sheet 1 of 2 Physical Jaket Material: Polyvinyl Chloride (PVC) Color: Black Primary Material: PVC Color: Gray Marking Standard: (UL) CL2 75C 28 AWG or AWM 20267 3M NU AWM IIA/B 80C 300V FT1 EU <50V Conductors: 28 AWG, 7 x 36 AWG 7 x 0.127 Tinned Stranded Copper Shielding: 0.001 0.03 Thick Aluminum/Polyester Film Foil and 90% Coverage Tinned Copper Braid Electrical Voltage Rating: USA: N.E.C. 725, CL2 or AWM 300V Canada: 300V EU: <50V 10 Insulation Resistance: > 1 10 /10 ft. 3m Unbalanced Balanced Characteristic Impedance: 62 106 Capacitance: 27.7 pF/ft 90.88 pF/m 15.2 pF/ft 49.9 pF/m Inductance: 0.11 H/ft 0.35 H/m 0.17 /ft 0.57 /m Propagation Delay: 1.72 ns/ft 5.64 ns/m 1.62 ns/ft 5.31 ns/m Velocity of Propagation: 59% 62% Note: Unbalanced is measured between ground-signal-ground conductors with shield grounded. Balanced is measured between signal conductors within a pair, with the shield floating. Environmental Temperature Rating: USA: -20 C to +105 C Canada: -20 C to +80 C Flammability Rating: USA: VW-1 Canada: FT1 RoHS Compliant 2005/95/E means that the product or part Produc) does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. This information represents 3M s knowledge and belief, which may be based in whole or in part on information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3Ms Regulatory Information Appendix, then 3Ms entire liability and Buyers exclusive will be in accordance with the Warranty stated below. UL File No.: E118773, Power Limited Circuit Cable: CL2 (or AWM Style 20267) 3 3M is a trademark of 3M Company. Interconnect Solutions For technical, sales or ordering information call 3M Round, Shielded/Jacketed, Flat Cable .050 28 AWG Stranded, Mass Terminatable, PVC/PVC 3659 Series Number of 3M Part Number Diameter A Dimension B Ref Conductors (See Note 2) 09 3659/09 0.27 6.9 0.40 10.2 10 3659/10 0.27 6.9 0.45 11.4 14 3659/14 0.31 7.9 0.65 16.5 15 3659/15 0.31 7.9 0.70 17.8 16 3659/16 0.31 7.9 0.75 19.1 Inch 20 3659/20 0.34 8.6 0.95 24.1 mm Tolerance Unless Noted 24 3659/24 0.37 9.4 1.15 29.2 .00 25 3659/25 0.37 9.4 1.20 30.5 .0 .000 Inch 26 3659/26 0.37 9.4 1.25 31.8 .1 .05 .010 34 3659/34 0.41 10.4 1.65 41.9 Dimensions for Reference only 36 3659/36 0.43 10.9 1.75 44.5 37 3659/37 0.43 10.9 1.80 45.7 40 3659/40 0.43 10.9 1.95 49.5 50 3659/50 0.48 12.2 2.45 62.2 60 3659/60 0.51 13.0 2.95 74.9 64 3659/64 0.54 13.7 3.15 80.0 Note: Contact 3M for availability of additional conductor counts. 2.4 Ref 61 1.0 Ref. Bonded 25 R Split A B Paper Braid Mfgr Option Aluminum .026 Min 0.66 Polyester 0.050 Typ PVC Jacket Film Foil 1.27 PVC Primary Insulation 28 AWG, 7 X 36 AWG 7 X 0.127 Tinned Stranded Copper Conductors Notes: 1. Red marking on one edge of primary cable designates wire 1. 2. Dimension B pertains to bonded area only. Ordering Information 3659 / XX XX X00 XX Blank = Standard SF = Splice Free Length of Roll in Feet 100 = 100 ft Standard 300 = 300 ft Standard Number of Conductors Blank = Standard (See Table) SO = Continuously Bonded Wire TS-0083-18 Sheet 2 of 2 (No Split) Note: Contact 3M for availability of custom roll lengths. 3 3M is a trademark of 3M Company. Interconnect Solutions For technical, sales or ordering information call