8100-YS 3M

3 * ST Connectors and Accessories 1The 3M ST* Connector product line provides high repeatability and low light loss for premises, LAN and telco applications. The improved connector design is compatible with the AT&T ST* connector product line as well as Systimax* components and other ST* connector products. The 3M products are supplied with a high quality PC finish on zirconia ceramic ferrules. 3 Crimplok ST* Connector, Bayonet Multimode/Single-mode The 3M Crimplok ST* Connector multimode/single- 2 mode connector combines the speed of non-adhesive Hot Melt ST* Connector, Bayonet connectors with the performance characteristics of epoxy Multimode/Single-mode and hot melt connectors. Crimplok connectors are the ideal solution for emergency restoration work or for quickly The 3M Hot Melt ST* Fiber Optic Connector is a keyed making fiber connections at the desk. Their time-saving bayonet-style multimode/single-mode connector, which features are also valuable in larger network applications incorporates 3Ms hot melt adhesive and pre-radiused PC where average installation time is less than 2 minutes per zirconia ceramic ferrule technologies. The result is a quick connector. Crimplok connectors are faster to install than mount fiber optic connector that delivers low light loss, solid epoxy connectors since there is no set-up or curing time. intermateability and mechanical stability, while costing less And Crimplok connectors do not require special heating to install. tools or ovens, so time spent searching for electrical outlets is eliminated. The Crimplok connector is ideal for fiber-to- ST* Hot Melt Bayonet Connector for the-desk and other applications where a few connectors are Multimode/Single-mode installed at a time. Features Benefits Crimplok ST* Connectors Pre-loaded Hot Melt adhesive No epoxy to mix no syringe needed shorter set-up time Features Benefits fewer consumables no shelf life Non-adhesive design Clean and simple terminations no mess no waste No set-up required Saves time and money Fast cure time Short heat and cool cycle saves time No electricity required Installation anywhere Meets TIA-568 specifications Rugged, reliable performance Unlimited adhesive shelf life Eliminates outdated epoxy inventory and stock rotation requirements No crimping required Fewer tools saves time 6 Pre-radiused PC ferrule Assured contact of fibers 5 consistent performance Zirconia ceramic ferrule Durability stability through 2 temperature change quality 7 performance 1 Re-usable Connector Ability to reterminate with same 4 connector saves time and money 3 ST* Connector 1. Dust cap 2. Ferrule 3. Backbone 4. BAYONET 5. Spring 6. C-Ring 7. Boot