3M 4-Wall, Tripolarized Header .050 .100 Latch/Ejector, PTH & SMT Straight, PTH Right Angle 810 Series Tripolarization to mating socket 50 mil 100 mil halves the connector length Latch and eject for rugged high performance applications Available for thru hole or surface mount attachment High temperature plastic Four-wall shroud provides contact protection Contacts: 20, 26, 36, 40, 50, 60, 68, 80 and 100 RoHS* compliant version available (RB plating suffix) Date Modified: September 2, 2005 TS-0253-29 Sheet 1 of 7 Physical Insulation Material: High Temperature Plastic (LCP) Flammability: UL 94V-0 Color: Black (RoHS compliant) or Natural Contact Material: Copper Alloy Plating Underplating: 100 2.54 m Nickel Wiping Area: 30 0.76 m Gold 300 7.6 m Matte Tin (RoHS compliant) or Tin-Lead (see Solder Tails: ordering information) Terminal Finish Indicator: e3 (ref JESD97) Marking: 3M Logo, Part Number and Orientation Triangle Electrical Current Rating: 0.5 A 9 Insulation Resistance: > 1 10 at 500 Vdc Withstanding Voltage: 500 Vrms at Sea Level Environmental Temperature Rating: -55C to +105C Process Rating: Maximum 260C (per J-STD-020C) Moisture Sensitivity Level: 1 (per J-STD-020C) * RoHS = Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic EquipmentRoHS complian means that the product or part does not contain any of the following substances in excess of the following maximum concentration values in any homogeneous material, unless the substance is in an application that is exempt under RoHS: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or prolybromianted diphenyl ethers or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M s knowledge and belief based upon information provided by third party suppliers to 3M. UL File No.: E68080 3M 3M is a trademark of 3M Company. Interconnect Solutions For technical, sales or ordering information call 3M 4-Wall, Tripolarized Header .050 .100 Latch/Ejector, PTH & SMT Straight, PTH Right Angle 810 Series Table 1 Inch m m Contact Dimensions Qty Tolerance Unless Noted A B C D Short D Long Ref Ref .0 .00 .000 inch .1 .01 .005 020 1.060 .722 .500 1.671 1.842 26.92 18.34 12.70 42.44 46.77 Dim ensions for R eference Only 026 1.210 .872 .850 1.817 1.987 30.73 22.15 16.51 46.15 50.47 036 1.460 1.122 .900 2.070 2.274 37.08 28.50 22.86 52.58 57.76 A 040 1.560 1.222 1.000 2.170 2.365 39.62 31.04 25.40 55.12 60.07 B 050 1.810 1.472 1.250 2.421 2.609 C 45.97 37.39 31.75 61.49 66.27 .015 X .015 060 2.060 1.722 1.500 2.671 2.872 0.38 X 0.38 52.32 43.74 38.10 67.84 72.95 2X .092 068 2.260 1.922 1.700 2.870 3.083 See Note 1 2.34 57.40 48.82 43.18 72.90 78.31 Position 2 080 2.560 2.222 2.000 3.178 3.370 65.02 56.44 50.80 80.72 85.60 100 3.060 2.722 2.500 3.676 3.875 77.72 69.14 63.50 93.37 98.43 .310 Table 2 Position 1 7.87 PCB Thickness F Solder Tail Length .010 .100 Ref .015 X .015 2.54 0.38 X 0.38 .062 15.7 .090 2.29 .050 Typ .094 2.39 .112 2.79 1.27 .125 3.18 .143 3.63 D Long Latch Short Latch .440 .010 .165 .010 11.18 2X .116 4.19 .105 2.95 .828 Ref 2.67 21.03 .160 Ref .265 .620 Ref 4.06 .405 6.73 15.75 10.29 .306 Ref 7.77 .140 .010 3.56 .015 Position 1 0.38 Orientation Triangle F (See Table 2) Notes: 1. This polarization bump does not exist on the 20 position header. 2. Recommended to be mated to the .050 X .100 Wiremount Socket 82XXX Series. Ordering Information Ejector Latch Long 81XXX-5X0X03-XX 3505-28 (natural) Plating suffix: Contact Quantity blank = tin lead tails 3505-28B (black) (See Table 1) RB = matte tin tails Short (RoHS compliant) Ejector/Latch System: 3505-29 (natural) 0 = None 3505-29B (black) Contact Tail: 5 = With Short Ejectors Installed 2 = Solder Tail for .062 1.57 PC Board 6= With Long Ejector Latches Installed 3 = Solder Tail for .094 2.39 PC Board TS-0253-29 4 = Solder Tail for .125 .318 PC Board Sheet 2 of 7 3M 3M is a trademark of 3M Company. Interconnect Solutions For technical, sales or ordering information call