3M Particulate Respirator 8210Plus, N95 Key Features NIOSH approved N95 rating Adjustable nose clip Nose foam Braided headbands Staple free headband attachment Material Composition Do Not Use For Straps Braided Polyisoprene DO NOT use for gases and vapors, oil Nose Clip Aluminum aerosols, asbestos, arsenic, cadmium, Nose foam Polyurethane Foam lead, 4,4-methylene dianiline (MDA), or Filter Polypropylene abrasive blasting Shell Polyester DO NOT use for particulate Coverweb - Polypropylene concentrations exceeding 10X This respirator contains no components PEL/OEL made from natural rubber latex DO NOT use in any manner not indicated Approximate weight of product: 0.35 oz. in the User Instructions See the 3M Technical Bulletin - Cellulose Certification - Filtering Facepiece Approvals and Standards Respirators for information about which 3M NIOSH approved N95 particulate respirators contain cellulose respirator Country of Origin Meets NIOSH 42 CFR 84 N95 Made in the USA with globally sourced requirements for a minimum 95% materials filtration efficiency against solid and liquid aerosols that do not contain oil. Use For NIOSH approval number: TC-84A-0007 Use for solid particulates and liquid mists Assigned Protection Factor (APF 10) in concentrations not exceeding 10X per US OSHA and Canada CSA PEL/OEL Always follow User Instructions and use in manners as indicated Time Use Limitation Acceptable Fit Test Protocols Replace the respirator when it becomes Acceptable with dirty, damaged, or difficult to breathe Fit Test Protocol* this product through. Saccharin Shelf Life and Storage BitrexTM 5 years from the date of manufacture Qualitative Use By date on box in MM/YYYY format Irritant Protocols Store respirators in the original Smoke packaging, away from contaminated Isoamyl areas, dust, sunlight, extreme Acetate temperatures, excessive moisture, and Quantitative Protocols damaging chemicals Store in temperatures between -4F *Refer to OSHA 1910.134 (-20C) and +86F (+30C) and not exceeding 80% RH WARNING This respirator helps reduce exposures to certain airborne contaminants. Before use, the wearer must read and understand the User Instructions provided as a part of the product packaging. Follow all local regulations. In the U.S., a written respiratory protection program must be implemented meeting all the requirements of OSHA 1910.134, including training, fit testing and medical evaluation. In Canada, CSA standard Z94.4 requirements must be met and/or requirements of the applicable jurisdiction, as appropriate. Misuse may result in sickness or death. For correct use, consult supervisor and the User Instructions or call 3M PSD Technical Service in USA at 1-800- 243-4630 and in Canada at 1-800-267- 4414. Personal Safety Division 3M Center, Building 0235-2W-70 For More Information St. Paul, MN 55144-1000 Technical Assistance 1-800-243-4630 3M.com/workersafety Hours of Operation: M-Th 8am - 6pm, Fri 8am - 4:30 pm CST 3M 2018. All rights reserved. 3M PSD products are occupational use only.