3 Specialty Terminals S 81F-180-NL, 82F-180-NL Female Snap Receptacle, Bullet Style, Nylon Fully Insulated, Butted Seam L Data Sheet Mating Snap Maximum Product Wire Range Diameter Barrel Barrel Insulation Number (AWG) SL Length I.D. Diameter 881F-180-NL202-1 02.18 15.005.205.09 0.14 842F-180-NL106-1 02.18 15.005.200.11 0.17 Installation Information WARNING CANADIAN STANDARDS Turn power off before installing or removing terminal. All electrical UNDERWRITERS work should be done according to appropriate electrical codes. ASSOCIATION LABORATORIES STANDARD NO. 22.2 STANDARD NO. UL 486A NO. 0, 65 3M FILE NO. E23438 UL Listed and CSA Certified for use on stranded copper 3M FILE NO. LR22190 (AWG) wire only. Strip away the end 3/8 inch of wire insulation. Specifications Make the crimp in the proper station of a recommended Wire Size: See Table Above 3M crimp tool: TH-440, TH-450 (scissor style), or Barrel Seam: Butted TR-490 (ratchet style) hand tools. Maximum Voltage Rating: 600 V Building Wire 1000 V Signs or Fixtures (Luminaires) Maximum Operating Temp: 221F (105C) Barrel Crimp (Electrical) Maximum Current: Same as Wire Insulator Material: Nylon Terminal Material: Brass Plating: TinEngineering Specification Crimp-Type Female Disconnects shall, electrically and The Nylon Fully Insulated Bullet-Style Female mechanically, connect permanently to a prestripped Disconnect shall be tin-plated 0.016 thick brass with end of a stranded copper wire and have a tongue por- a receptacle for gripping a bullet-style Male Tab of tion with fingers which grip a Male Disconnect in a diameter 0.180 per ANSI/NEMA CD-2 and a 0.25 separable, reusable manner, forming a Quick Connect long barrel covered by a molded nylon funnel entry Wiring Termination. sleeve, which extends to cover the tongue, color coded and sized for a specified (AWG) wire range (red, The connector line shall offer tongue variations (sized 22-18 blue, 16-14). to grip bullet-style Male Tabs 0.180 diameter per ANSI/NEMA CD-2) and barrel variations in wire Insulated connectors shall be UL Listed and CSA (AWG) size (22-18, 16-14) and construction (vinyl Certified for 600 V building wire: 1000 V signs or insulated, nylon fully insulated, etc.). The female dis- lighting fixtures (luminaires) and temperature rated connects shall have regulatory agency coverage (UL 221F (105C) maximum. Listing, CSA Certification). The tongue portion shall be marked with the wire range and manufacturers symbol ( ). 3M is a trademark of 3M. is a trademark of Underwriters Laboratories. is a trademark of Canadian Standards Association. IMPORTANT NOTICE Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Warranty Limited Remedy Limited Liability. This product will be free from defects in material and manufacture as of the date of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3Ms option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect, special, incidental or consequential regardless of the legal theory asserted. Electrical Products Division 6801 River Place Blvd. Austin, TX 78726-9000 Litho in USA. 3M 2002 78-8126-0723-8-A