4 3 2 1 NOTES 1 DIMENSIONS ARE IN MILLIMETERS. TM 3M TWIN AXIAL CABLE ASSEMBLY TM 2 3M RIBBON TWINAX DESCRIPTION: FOR PCIe X4 EXTENDER CARD APPLICATIONS 30 AWG, SILVER PLATED SIGNAL WIRE IMPEDANCE: 85 5 OHM OVERALL RIBBON WIDTH: 24.90 MM 5.5 OVERALL RIBBON THICKNESS: 0.75 MM 4.5 2X CABLE PART NO: 3749-20 3 ROHS COMPLIANT. SEE REGULATORY INFORMATION APPENDIX INROHS D D PIN B1 COMPLIANC SECTION AT PIN B1 WWW.3MCONNECTORS.COM PCB ASSY, PCIE X4 (E1 & C1 APPLY) (64 POS) STRADDLEMOUNT 4 THIS CABLE CONSTRUCTION HAS A THIN ALUMINUM INNER LAYER PCIE X4 EXTENDER 58.0 EXPOSED AT EACH EDGE. USERS (64 POS) CARD-EDGE SHOULD ASSESS WHETHER THE EXPOSED EDGE PRESENTS A SHORTING RISK IN THEIR SPECIFIC APPLICATION. INSULATING TAPE MAY BE APPLIED AT THE CABLE ASSEMBLY LEVEL, AS PIN B32 NEEDED, TO COVER THE EXPOSED PIN B32 EDGE IN RISK AREAS. SIDE B 2X CABLE PART NO: SL8802/14-18DN5-00 5 APPLICABLE SPECIFICATIONS: 2X 3.5 PRODUCT SPECIFICATION NUMBER: 6 ORDER BY APPLICABLE 3M PART NUMBER: 8KJ1-0727-XXXX ADHESIVE ENCAPSULANT APPLIED TO CABLE ENDS C 2X 1.57 C XXXX = DIM A IN MILLIMETERS (1000 = 1 METER) 8.7 STANDARD LENGTH (DIM A ) 8KJ1-0727-0250 (250 MM) ADHESIVE ENCAPSULANT 8KJ1-0727-0500 (500 MM) APPLIED TO CABLE ENDS NON-STANDARD LENGTHS AVAILABLE UPON SPECIAL REQUEST. MAY REQUIRE HIGHER MOQS AND LONGER LEAD TIMES. 150 MM MINIMUM LENGTH. +5 DIM A -0 7 FLAMMABILITY RATING: SEE NOTE 6 TWIN AX CABLE: UL94 HB 38 PCBS: UL94V-0 ADHESIVE STRAIN RELIEF: UL94 HB, PART LABEL (TBV) 27.0 (WRAP AROUND) PIN A32 3M PART NUMBER 8 PADDLECARD FINGER GOLD THICKNESS: 9.0 DATE CODE: XXYY 0.76 m 30 MIN ELECTROLYTIC XX = YEAR HARD GOLD OVER 1.27 m 50 PIN A32 YY = WEEK MIN ELECTROLYTIC NICKEL. B B 47.2 67.0 B 42467 AUG 06,2012 LDS TS 15.5 PIN A1 REVISED NOTE 6 SIDE A A 40795 JUN 18,2012 LDS TS PIN A1 INITIAL RELEASE BILL OF MATERIALS DESIGN REFERENCE NEXT ASSEMBLY REV ECO ISSUE DATE AND DESCRIPTION DRFT CHKD ITEM DESCRIPTION QTY DISTRIBUTION DRFT DATE MFG DATE CODES L SCHMIDT APR 09,2012 1.0 PBA PCB ASSY, PADDLECARD, PCIE X4 1 CHKD DATE APPVL DATE PCIE X4 (64 POS) STRADDLEMOUNT DIVISION DIVISION CODE 1.1 PCB 1 C 3M COPYRIGHT 2012 3M P/N: 78-9101-6810-9 3M Center This document and the information it contains are 3M property and may not be reproduced or further St. Paul, SCALE TOLERANCES DO NOT distributed without 3M permission, or used or CONNECTOR, PCIE 64 POSITION, FEMALE MN 55144 EXCEPT AS disclosed other than for 3M authorized purposes. 1.2 CONN 1 1 SCALE All rights reserved. A SOCKET NOTED A 1 DRAWING TITLE INCHES PCIE X4 EXTENDER (64 POS) CARD-EDGE 2.0 PCB 1 .0 3M P/N: 78-9101-6809-1 8KJ1-0727-XXXX, CABLE .00 RIBBON TWIN AX CABLE .000 3.0 CABLE 2 ASSY, PCIE X4 BY PCIE THIRD ANGLE PROJECTION .0000 3M P/N: SL8802/14-18DN5-00 MILLIMETERS INTERPRET PER X4 EXTENDER RIBBON CABLE, 20 POSITION ASME Y14.5 - 1994 4.0 CABLE 2 0 1 3M P/N: 3749-20 .0 .5 CAGE SIZE DRAWING NO. REV. MAX SURFACE ROUGHNESS .00 .05 STRAIN AS NUMBER 5.0 ADHESIVE ALL SURFACES .000 .005 78-5100-2521-2 B RELIEF REQUIRED 125 MODEL DET. MARKED ONLY ANGLES 1 YES NO SHT 1 OF 2 LISTS 4 3 2 1 78-5100-2521-2 B DRAWING NUMBER REVISION4 3 2 1 3M 3749-20 Cable 3M 3749-20 Cable Wire Pin Attachment Pin Attachment Wire 01 Ground Layer Ground Layer 01 D D 02 B01 - B02 A01 02 03 B01 - B02 Ground Layer 03 04 B01 - B02 A02 - A03 04 05 B01 - B02 A02 - A03 05 06 B01 - B02 PCI-Express X4 Pin-Out A02 - A03 06 07 B01 - B02 Pin Side B Description Side A Description Pin A02 - A03 07 08 Ground Layer B01 +12 volt power Hot plug presence detect A01 Ground Layer 08 09 B05 B02 +12 volt power +12 volt power A02 A05 09 10 B06 B03 +12 volt power +12 volt power A03 A06 10 11 Ground Layer B04 Ground Ground A04 A07 11 12 B08 B05 SMBus clock TCK A05 A08 12 13 B08 B06 SMBus data TDI A06 Ground Layer 13 14 B09 B07 Ground TDO A07 A09 - A10 14 15 B10 B08 +3.3 volt power TMS A08 A09 - A10 15 16 B10 B09 +TRST +3.3 volt power A09 A09 - A10 16 17 Ground Layer B10 3.3v volt power +3.3 volt power A10 A09 - A10 17 18 B11 B11 Link Reactivation Power Good A11 Ground Layer 18 C C 19 Ground Layer Mechanical Key Ground Layer 19 20 B12 B12 Reserved Ground A12 A11 20 B13 Ground Reference Clock A13 B14 Transmitter Lane 0, Differential pair A14 3M SL8802 Cable 3M SL8802 Cable B15 Differential pair Ground A15 Pin Attachment Wire Wire Pin Attachment B16 Ground Receiver Lane 0, A16 Ground Layer GND GND Ground Layer B17 Hotplug detect Differential pair A17 A13 pr 01 pr 01 B14 B18 Ground Ground A18 A14 pr 01 pr 01 B15 B19 Transmitter Lane 1, Reserved A19 A16 pr 02 pr 02 B17 B20 Differential pair Ground A20 A17 pr 02 pr 02 Ground Layer B21 Ground Receiver Lane 1, A21 Ground Layer pr 03 pr 03 B19 B22 Ground Differential pair A22 A19 pr 03 pr 03 B20 B23 Transmitter Lane 2, Ground A23 A21 pr 04 pr 04 B23 B24 Differential pair Ground A24 A22 pr 04 pr 04 B24 B25 Ground Receiver Lane 2, A25 Ground Layer GND GND Ground Layer B26 Ground Differential pair A26 A25 pr 05 pr 05 B27 B B27 Transmitter Lane 3, Ground A27 B A26 pr 05 pr 05 B28 B28 Differential pair Ground A28 A29 pr 06 pr 06 Ground Layer B29 Ground Receiver Lane 3, A29 A30 pr 06 pr 06 Ground Layer B30 Reserved Differential pair A30 A32 pr 07 pr 07 B30 B31 Hot plug detect Ground A31 Ground Layer pr 07 pr 07 B31 B32 Ground Reserved A32 Ground Layer GND GND Ground Layer B 42467 AUG 06,2012 LDS TS REVISED NOTE 6 A 40795 JUN 18,2012 LDS TS INITIAL RELEASE DESIGN REFERENCE NEXT ASSEMBLY REV ECO ISSUE DATE AND DESCRIPTION DRFT CHKD DISTRIBUTION DRFT DATE MFG DATE CODES L SCHMIDT APR 09,2012 CHKD DATE APPVL DATE DIVISION DIVISION CODE C 3M COPYRIGHT 2012 3M Center This document and the information it contains are 3M property and may not be reproduced or further St. Paul, SCALE TOLERANCES DO NOT distributed without 3M permission, or used or MN 55144 EXCEPT AS disclosed other than for 3M authorized purposes. 1 SCALE All rights reserved. A NOTED A 1 DRAWING TITLE INCHES .0 8KJ1-0727-XXXX, CABLE .00 .000 ASSY, PCIE X4 BY PCIE THIRD ANGLE PROJECTION .0000 MILLIMETERS INTERPRET PER X4 EXTENDER ASME Y14.5 - 1994 0 1 .0 .5 CAGE SIZE DRAWING NO. REV. MAX SURFACE ROUGHNESS .00 .05 NUMBER ALL SURFACES .000 .005 78-5100-2521-2 B 125 MODEL DET. MARKED ONLY ANGLES 1 YES NO SHT 2 OF 2 LISTS 4 3 2 1 78-5100-2521-2 B DRAWING NUMBER REVISION