3M Pleated Foil Shielded Cable .025 30 AWG Solid, TPE Primary, PVC Jacket 90101 Series Compatible with IDC mass termination connectors Functions with applications requiring standard impedance of 100 balanced (differential) Solid pleated copper foil provides flexibility and 35 db average shielding effectiveness CL2 rated, rugged design and high reliability for peripheral applications See the Regulatory Information Appendix (RIA) in the RoHS compliance section of www.3Mconnectors.com for compliance information (RIA E1 & C1 apply) Date Modified: September 3, 2013 TS-0285-D Sheet 1 of 2 Physical Jacket: Material: Polyvinyl Chloride (PVC) Color: Gray Primary Material: Thermoplastic Elastomer (TPE) Marking: Standard: (UL) CL2 75C 30 AWG 3M NU C AWM IIA/B 80C 150V FT1 EU <50V Conductors: 30 AWG 0.254 Tinned Solid Copper Shielding: Solid, Pleated, Copper Foil Electrical Voltage Rating: USA: N.E.C. 725, CL2 Canada: 150V EU: <50V 10 Insulation Resistance: (Primary Cable) > 1 10 /10 ft. 3 m Unbalanced Balanced Characteristic Impedance: 53 104 Capacitance: 28.4 pF/ft 93.2 pF/m 14.5 pF/ft 47.6 pF/m Inductance: 0.08 H/ft 0.26 H/m 0.16 H/ft 0.52 H/m Propagation Delay: 1.52 ns/ft 4.99 ns/m 1.51 ns/ft 4.95 ns/m Velocity of Propagation:67% 67% Note: Unbalanced is measured between ground-signal-ground conductors with shield grounded. Balanced is measured between signal conductors within a pair with the shield floating. Environmental Temperature Rating: USA: CL2: 75C Canada: 80C Flammability Rating: USA: N.E.C. 725, CL2 Canada: FT1 UL File No.: E118773, Power Limited Circuit Cable: CL2 3M is a trademark of 3M Company. 3 Interconnect Solutions For technical, sales or ordering information call 3M Pleated Foil Shielded Cable .025 30 AWG Solid, TPE Primary, PVC Jacket 90101 Series Number of 3M Part Number Dimension A Dimension B Conductors 20 90101/20 0.60 15.2 0.475 .006 12.07 26 90101/26 0.75 19.1 0.625 .006 15.88 36 90101/36 1.00 25.4 0.875 .009 22.23 40 90101/40 1.10 27.9 0.975 .009 24.77 50 90101/50 1.35 34.3 1.225 .009 31.12 68 90101/68 1.80 45.7 1.675 .012 42.55 80 90101/80 2.10 53.3 1.975 .015 50.17 100 90101/100 2.60 66.0 2.475 .017 62.87 A B .025 .002 Typ 0.64 .10 .03 2.5 TPE Primary .026 (0.66) Min 30 AWG 0.254 Insulation PVC Jacket Tinned Solid Copper Conductors Paper .005 0.13 Pleated Foil Shield with Adhesive Backing using Solid (Mfgr. Option) Copper Foil .001 0.03 Thick Inch mm Tolerance Unless Noted .0 .00 .000 Inch .1 .05 .010 Dimensions for Reference Only Note: Blue marking on edge of primary cable designates wire 1. Ordering Information 90101/XX XX Number of Conductors Blank = Standard (See Table) SF = Splice Free Note: Standard lengths are 100 ft, 150 ft, and 300 ft rolls. TS-0285-D Sheet 2 of 2 Please specify when ordering. 3M is a trademark of 3M Company. 3 Interconnect Solutions For technical, sales or ordering information call