Scotchlok 901 Self-Stripping In-Line Bullet Receptacle Data Sheet Application Recommended Installation Tools Use Part No. 901 to electrically tap into a wire in Mechanics (slip joint) Pliers mid-span without cutting or stripping the wire. 3M Crimping Tool No. E-9BM Connector then mates with a .156 (4.0 mm) male bullet, making a reusable plug connect wiring Installation Instructions termination. WARNING Wire Range Turn power off before installing or removing terminal. All electrical 18-14 AWG Solid or stranded, tinned or untinned work should be done according to appropriate electrical codes. 2 (.75-1.5 mm sol. or str.) copper conductors. For use with common thermoplastic insulated wires such as: 1. Do not strip run wire. SAE-GPT, T, TF, TFF, TW, with a maximum insulation diameter of .145 inches (3.5 mm). Maximum 2. Place run wire in open channel. recommended connector current: 3. Fold the connector body over until the element 18 AWG - 7 AMPS, 16 AWG - 10 AMPS, contacts the wire. 14 AWG - 15 AMPS. 4. Crimp the connector closed with pliers. Construction 5. Slide male bullet all the way into bullet port. U-contact - Tin plated copper alloy Note: Male bullet not included02 in. (0,5 mm) thick Insulator - Polypropylene, Recommended Voltage and Temperature Color - black Ratings Weight 32 volts maximum. 90C (194F) maximum0033 lb. (1.51 gm)Engineering Specification Self-Stripping Electrical Connector (as manufactured by 3M, part No. 901) capable of connecting to a .156 male bullet in a separable, reusable manner. Connector shall be voltage rated 32 volts maximum, and temperature rated 90C maximum. 3M and Scotchlok are trademarks of 3M Company. IMPORTANT NOTICE Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Warranty Limited Remedy Limited Liability. This product will be free from defects in material and manufacture as of the date of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3Ms option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect, special, incidental or consequential regardless of the legal theory asserted. Electrical Products Division 6801 River Place Blvd. Austin, TX 78726-9000 Litho in USA www.3M.com/elpd 3M 2003 78-8126-5510-4-A