3M Pleated Foil Shielded Cable .025 30 AWG Solid, TPE Primary, Thin TPE Cover 90201 Series Can be used with IDC mass termination connectors Can be used in applications requiring standard impedance of 100 balanced (differential) Perfect for board-to-board applications within electronic equipment, TPE covering prevents pleated copper foil from accidental shorting Solid pleated copper foil provides flexibility and 35 db average shielding effectiveness See Regulatory Information Appendix (RIA) for chemical compliance information (RIA E1 & C1 apply) Date Modified: September 3, 2013 TS-0402-C Sheet 1 of 2 Physical Cover Material: Thermoplastic Elastomer (TPE) Cover Color: Gray Primary Material: Thermoplastic Elastomer (TPE) Marking: Standard: None Canadian Option: AWM 20674 105C 150V VW1 3M NU C AWM IA 105C 150V FT1 EU <50V Conductors: 30 AWG 0.254 Tinned Solid Copper Shielding: Solid, Pleated, Copper Foil Electrical Voltage Rating: USA: 150V Canada: 150V EU: <50V 10 Insulation Resistance: (Primary Cable) > 1 10 /10 ft. 3 m Unbalanced Balanced Characteristic Impedance: 53 104 Capacitance: 28.4 pF/ft 93.2 pF/m 14.5 pF/ft 47.6 pF/m Inductance: 0.08 H/ft 0.26 H/m 0.16 H/ft 0.52 H/m Propagation Delay: 1.52 ns/ft 4.99 ns/m 1.50 ns/ft 4.95 ns/m Velocity of Propagation: 67% 67% Note: Unbalanced is measured between ground-signal-ground conductors with shield grounded. Balanced is measured between signal conductors within a pair with the shield floating. Environmental -20C to +105C Temperature Rating: Flammability Rating: USA: VW-1 Canada: FT1 UL File No.: E42769, Style No.: 20674 3M is a trademark of 3M Company. 3 Interconnect Solutions For technical, sales or ordering information call 3M Pleated Foil Shielded Cable .025 30 AWG Solid, TPE Primary, Thin TPE Cover 90201 Series Number of 3M Part Number Dimension A Dimension B Conductors 20 90201/20 0.54 13.7 0.475 .006 12.06 26 90201/26 0.69 17.5 0.625 .006 15.88 (OPTIONAL) 36 90201/36 0.94 23.9 0.875 .009 22.23 40 90201/40 1.04 26.4 0.975 .009 24.77 50 90201/50 1.29 32.8 1.225 .009 31.11 60 90201/60 1.54 39.1 1.475 .012 37.47 68 90201/68 1.74 44.2 1.675 .012 42.55 80 90201/80 2.04 51.8 1.975 .015 50.17 100 90201/100 2.54 64.5 2.475 .017 62.87 A B .025 .002 Typ 0.64 .06 .02 1.52 30 AWG 0.254 TPE Primary .005 (0.13) Min Tinned Solid Copper Conductors Insulation TPE Covering .005 0.13 Pleated Foil Shield With Adhesive Backing Using Solid Copper Foil .001 0.03 Thick Inch mm Tolerance Unless Noted .0 .00 .000 Inch .1 .05 .010 Dimensions for Reference Only Note: Blue marking on edge of primary cable designates wire 1. Ordering Information 90201/XXX XX Blank = Standard C = CSA Certified Version Number of Conductors Blank = Standard (See Table) SF = Splice Free TS-0402-C Note: Available in standard 100 ft or 300 ft rolls, please specify when ordering. Contact Sheet 2 of 2 3M for availability of additional conductor counts and/or custom roll lengths. 3M is a trademark of 3M Company. 3 Interconnect Solutions For technical, sales or ordering information call