Specialty Connectors 91, 92, 93 L Parallel Connector, Non-Insulated, Butted Seam Data Sheet Wire Barrel I.D. Product Range Barrel Number(LAWG) Thickness Length IAn CM 981 212-1 00.3 05.03 00.2 00.07 490 942 116-1 00.3 05.03 00.2 00.09 810 903 112-1 00.3 05.04 05.2 05.13 1822 91 Installation Information 1 22 to 1 22, 20, 18, 16 1 20 to 1 20, 18, 16 WARNING 1 18 to 1 18 Turn power off before installing or removing terminal. All electrical Min. CMA: 1280, Max. CMA: 3600 work should be done according to appropriate electrical codes. 92 1 22 to 1 22, 20, 18, 16, 14 Strip away the end 3/8 inch of wire insulation. 1 20 to 1 20, 18, 16, 14 1 18 to 1 18, 16, 14 Make the crimp in the proper station of a recommended 1 16 to 1 16 3M crimp tool: TH-440, TH-450 (scissor style) or Min. CMA: 1280, Max. CMA: 5730 TR-490 (ratchet style) hand tools. 93 1 18 to 1 18, 16, 14, 12, 10 1 16 to 1 16, 14, 12, 10 1 14 to 1 14, 12 Min. CMA: 3240, Max. CMA: 12860 Specifications Wire Insertion Wire Size: See Table Above Barrel Seam: Butted Maximum Operating Temp: 347F (175C) Maximum Current: Same as Wire Terminal Material: ETP Copper Terminal Plating: TinEngineering Specification Crimp-type terminals shall, electrically and The Non-Insulated, Butted Seam Parallel Connector mechanically, connect permanently to the pre-stripped shall be tin-plated, annealed copper, having a round end of two stranded copper wires. barrel, sized for a specified (AWG) wire range (22-18, 16-14, 12-10). The connector line shall offer barrel variations in wire (AWG) size (22 thru 4) and construction (non- insulated brazed seam, vinyl insulated butted seam, seamless, etc.). 3M is a trademark of 3M IMPORTANT NOTICE Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Warranty Limited Remedy Limited Liability. This product will be free from defects in material and manufacture as of the date of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3Ms option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect, special, incidental or consequential regardless of the legal theory asserted. Electrical Products Division 6801 River Place Blvd. Austin, TX 78726-9000 Litho in USA.