3M Polyimide Film
Electrical Tape 92
Polyimide Film Tape with Silicone Pressure Sensitive Adhesive
Data Sheet February 2017
Description
3M Polyimide Film Electrical Tape 92 is a 1-mil polyimide film backing with
silicone adhesive. Its silicone pressure-sensitive adhesive allows it to be used at
356F (180C), and it is UL 510 Flame Retardant. Like most insulated tapes,
from 3M, Tape 92 is available in standard and custom widths and lengths. The
standard length is 36 yards, and can be cut to widths ranging from 1/4 to 23.
Longer lengths up to several times normal length are possible, dependent upon
width.--Check with Customer Service for details.
Agency Approvals UL Recognized component listing not to exceed 180C (356F), Meets flame
& Self Certifications retardant requirements of UL510, Product Category OANZ2, and 3M File No.
E17385
UL File Number E17385 A and B, Guide OANZ2. Underwriters Laboratories (UL) Recognized
products have been evaluated for use as components of end-product equipment that is listed or
classified by UL. To achieve Underwriters Laboratories recognition, component construction must
meet UL specifications and conditions of acceptability for proper and safe use of the component or
product.
Product Category OANZ2, File E17385
For RoHS information, please visit www.3M.com/ROHS
3M 92 Tape is used for high-temperature electrical applications in which a tough,
Applications
thin insulating material is required for wrapping coils, transformers, capacitors,
wire harnesses, and for anchoring leads / terminal boards. It also is used in
printed circuit board assembly as a wave solder masking tape.
3M 92 Tape is a polyimide film with thermosetting silicone pressure-sensitive
Specifications
adhesive.
The tape shall be coated on one side with pressure-sensitive adhesive, which
shall not require heat, moisture or other preparation prior to or subsequent to
application. The adhesive coating shall be smooth and uniform and be free of
lumps and bare spots. There shall be no separator between adjacent layers of
the roll. The tape shall perform at a temperature of -40F (-40C) to 356F
(180C) without substantial loss of tensile or electrical properties
1 of 2 3M
3M Polyimide Film Electrical Tape 92
Typical Properties Not for specifications. Values are typical, not to be considered minimum or
maximum. Properties measured at room temperature 73F (23C) unless otherwise
stated.
Physical Property (Test Method) Typical Value
(ASTM D1000 unless noted) US units (metric)
Color Amber
Adhesive Thermosetting Silicone
Backing Thickness 1.0 mils (0,025 mm)
Overall Thickness 3.0 mils (0,076 mm)
Tensile Strength 30 lbs / inch width (53 N / 10 mm)
Elongation (% at break) 55% minimum
Electrolytic Corrosion Factor
1.0
(3M internal test method)
Adhesion to Steel 25 oz / inch width (2,8 N / 10 mm)
Comparative Tracking Index
CTI Group IIIb
(IEC Method 112)
Printable Yes
Dielectric Breakdown > 7,500 V
6
Insulation Resistance > 1 x10 Megaohms
Shelf Life & Storage This product has a 5-year shelf life from date of manufacture when stored in a
humidity controlled storage (10C/50F to 27C/80F and <75% relative humidity).
Availability Please contact your local distributor; available from 3M.com/electrical [Where to Buy]
or call 1-800-676-8381.
3M is a trademark of 3M Company.
Important Notice All statements, technical information, and recommendations related to 3Ms products are based on information
believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must
evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated
with such use. Any statements related to the product, which are not contained in 3Ms current publications, or any
contrary statements contained on your purchase order, shall have no force or effect unless expressly agreed upon,
in writing, by an authorized officer of 3M.
Warranty; Limited This product will be free from defects in material and manufacture at the time of purchase. 3M MAKES NO OTHER
Remedy; Limited WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR
Liability FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above,
your exclusive remedy shall be, at 3Ms option, to replace or repair the 3M product or refund the purchase price of
the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or
consequential loss or damage arising from this 3M product, regardless of the legal theory asserted.
3M
Electrical Markets Division
6801 River Place Boulevard
Austin, TX 78726-9000
800.676.8381 Please recycle
Fax: 800.828.9329 3M 2017 All rights reserved
www.3m.com/oem 78-8124-4760-1 Rev E
Page 2 of 2