Specialty Terminals W 71F-250-32-NB, 72F-250-32-NB Female Disconnect, Nylon Insulated with Insulation Grip L Data Sheet Mates with Male Tab Maximum Product Wire Range Width (W ) Barrel Barrel Insulation Number (AWG)xLThickness Length I.D. Diameter 781F-250-32-NB222-106.250 x 0.0305.800.205.08 0.14 742F-250-32-NB126-106.250 x 0.0305.800.205.08 0.14 Installation Information WARNING CANADIAN STANDARDS UNDERWRITERS Turn power off before installing or removing terminal. All electrical ASSOCIATION LABORATORIES work should be done according to appropriate electrical codes. STANDARD NO. 22.2 STANDARD NO. UL 310 NO. 153 3M FILE NO. E70512 UL Listed and CSA Certified for use on stranded 3M FILE NO. LR22190 copper (AWG) wire only. Strip away the end 3/8 inch of wire insulation. Make the crimp in the proper station of a recommended 3M crimp tool: TH-440, TH-450 (scissor style), or TR-482, TR-490 (ratchet style) hand tools. Specifications Wire Size: See Table Above Barrel Seam: Butted with Insulation Grip Barrel Crimp (Electrical) Maximum Voltage Rating: 600 V Building Wire 1000 V signs or Insulation Crimp (Mechanical) fixtures (Luminaires) Maximum Operating Temp: 221F (105C) Maximum Current: Same as Wire Insulator Material: Nylon Terminal Material: Brass Insulation Grip Material: Brass Plating: TinEngineering Specification The Nylon Inuslated 0.250 Female Disconnect with Crimp-Type Female Disconnect shall, electrically and insulation grip, shall be tin plated 0.020 thick brass mechanically, connect permanently to a prestripped with a tongue for gripping a 0.250 x 0.032 Male Tab end of a stranded copper wire and have a tongue portion with fingers which grip a Male Disconnect in a per ANSI/NEMA-CD-2 and a 0.25 long barrel with a separable, reusable manner, forming a Quick Connect tin plated brass funnel entry insulation grip, covered by a molded nylon sleeve, color coded and sized for a Wiring Termination. specified (AWG) wire range (22-18, 16-14). The connector line shall offer tongue variations (sized to grip male tabs 0.250 x 0.032 or 0.187 x 0.020 Insulated connectors shall be UL Listed and CSA per ANSI/NEMA CD-2) and construction, non- Certified for 600 V building wire: 1000V signs or lighting fixtures (luminaires) and temperature rated insulated, nylon insulated with insulation grip, nylon 221F (105C) maximum. fully insulated, etc. The Female Disconnects shall have regulatory agency coverage, UL Listing, CSA Certification. The tongue portion shall be marked with Female Disconnects shall be suitable for field or factory wiring, with a UL Recognized strain relief the wire range and manufacturers symbol ( ). required. 3M is a trademark of 3M. is a trademark of Underwriters Laboratories. is a trademark of Canadian Standards Association. IMPORTANT NOTICE Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Warranty Limited Remedy Limited Liability. This product will be free from defects in material and manufacture as of the date of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3Ms option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect, special, incidental or consequential regardless of the legal theory asserted. Electrical Products Division 6801 River Place Blvd. Austin, TX 78726-9000 Litho in USA. 3M 2002 78-8126-0816-0-A