MicroTouch TouchPen System for ClearTek II Touch Screens Extended Touch Solutions Product Highlights The MicroTouch ClearTek II TouchPen System extends the input Dual input mode (pen stylus or finger touch) with vibrant optics flexibility of MicroTouch ClearTek II capacitive touch screens by supporting both touch and pen input. TouchPens tethered stylus offers Pen-only input mode for handwriting handwriting recognition, signature capture, and on-screen annotation recognition, signature capture, capabilities. It is an excellent solution for applications with dense menus or on-screen annotation applications, or with detailed images too small to touch with a finger. to avoid unintended touches. Flexible Input Modes Excellent draw precision and touch accuracy The TouchPen system can be set up in dual mode (pen or finger touch input) or pen-only mode. Based on high-performance EXII ASIC platform In dual mode, the touch screen accepts touch from both the tethered pen or from a users finger for ease of use in a multitude of point-of-sale signature capture applications. In dual mode, while accepting input from the pen, all other input is ignored supporting palm rejection in a ver y sophisticated manner. In pen-only mode, only pen inputs are accepted, making it an ideal solution for applications where unintended touches may create problems. Making the Difference The TouchPen System is based on the MicroTouch EX II 3700SP, a serial RS232 controller, which takes advantage of the EX II ASIC electronics platform. The EX II 3700SP controller offers a wide operating temperature range, high touch resolution, expanded regulator y approvals, improved ESD and EMI reliability. Adding to its application flexibility, the EX II 3700SP offers the capability to upgrade its firmware, even after installation and deployment. MicroTouch TouchPen System for ClearTek II Touch Screens TouchPen System System Components Any standard ClearTek II touch screen combined with an add-on kit containing a tethered-pen controller, pen stylus, and cable kit Mean Time Between Failure Controller: >600,000 hours MTBF Pen: 4 million hours MTBF Operating Temperature Range -15 C to +70 C Operating Humidity Range <36 C 0-90% RH, non-condensing Storage Temperature Range -30 C to +70 C Storage Humidity Range <36 C 0-90% RH, non-condensing Power Requirements 12Vdc (sourced from the controller through the J1 connector) Minimum Touch Duration <14 milliseconds Touch Resolution* 2048 x 2048 Electro Static Discharge 22Kv Air, 8 Kv Contact (ESD Susceptibility) Host Cable 96 (2.4m) long Regulatory Compliance UL/cUL, FCC-B, CE, VCCI, AS/NZS 3548 ClearTek II TouchPen is compliant with the European Union 2002/95/EC Directive on Restriction of Hazardous Substances (RoHS) TouchPen Controller (EXII-3710SP) Sensor Connection 6-pin Molex connector Communications Protocol Serial RS 232 Controller Dimensions 4.80 x 1.35 (121.9 mm x 34.3 mm) System Warranty 5 years TouchPen Stylus (69-502) Pen Material ABS plastic, lightly textured surface, offered in black Pen Dimensions 6 (152.4mm) length without stain relief, 0.42 (10.67mm) diameter. Pen Cabling 3.5 (1.07 meters) tether, strain relief to 20 lbs. (7.71 kg) pull force. Pen Tip (Conductive) Replaceable pen tips (order part number 2604634) Pen Connector 8-pin Rj 45 phone jack Resolution 2048 x 2048 or greater touch point per axis within the calibrated area TouchPen System Cable Kit for ClearTek II (69-901) Inclusive Part Numbers 69-502, Stylus 7311273, Serial RS-232 cable, 96 (2.4m) 7311420, Cable, TouchPen controller to RJ45 7319522-03, ClearTek II adapter cable * The maximum number of addressable coordinates generated by the controller NOTE: TouchPen stylus, pen tips, and controller cables available separately 3M Touch Systems RoHS Directive compliant: In accordance with European Directive 2002/95/EC, RoHS Directive compliant means that the product or part does not contain any of the following sub- stances in excess of the following maximum concentration values in any homogeneous material, unless the substance is in an application that is exempt under RoHS: (a) 0.1% (by weight) 300 Griffin Brook Park Drive for lead, mercur y, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this Methuen, MA 01844 information represents 3Ms knowledge and belief based on information provided by third party suppliers to 3M. (9/06) U.S.A. NOTICE: Given the variety of factors that can affect the use and performance of a 3M Touch Systems Product (the Product), including that solid state equipment has operation char- 1-888-659-1080 acteristics different from electro mechanical equipment, some of which factors are uniquely within Users knowledge and control, it is essential that User evaluate the 3M Touch Systems www.3M.com/touch Product and software to determine whether it is suitable for Users particular purpose and suitable for Users method of application. 3M Touch Systems statements, engineering/technical information, and recommendations are provided for Users convenience, but their accuracy or completeness is not warranted. 3M Touch Systems products and software are not specicfi ally For more information designed for use in medical devices as denfi ed by United States federal law. 3M Touch Systems products and software should not be used in such applications without 3M Touch Systems on 3M touch products, express written consent. User should contact its sales representative if Users opportunity involves a medical device application. call 888-659-1080 IMPORTANT NOTICE TO PURCHASER: Specifications are subject to change without notice. These 3M Touch Systems Products and software are warranted to meet their published specifications from the date of shipment and for the period stated in the specification. 3M Touch Systems makes no additional warranties, express or implied, including but not limited to any implied warranties of merchantability or fitness for a particular purpose. User is responsible for determining whether the 3M Touch Systems Products and software are fit for Users par - ticular purpose and suitable for its method of production, including intellectual property liability for Users application. If the Product, software or software media is proven not to have met 3M Touch Systems warranty, then 3M Touch Systems sole obligation and Users and Purchasers exclusive remedy, will be, at 3M Touch Systems option, to repair or replace that Product quantity or software mediator to refund its purchase price. 3M Touch Systems has no obligation under 3M Touch Systems warranty for any Product, software or software media that has been modified or damaged through misuse, accident, neglect, or subsequent manufacturing operations or assemblies by anyone other than 3M Touch Systems. 3M Touch Systems shall not be liable in any action against it in any way related to the Products or software for any loss or damages, whether non-specified direct, indirect, special, incidental or consequential (including downtime, loss of profits or goodwill) regardless of the legal theor y asserted. (7/02) MicroTouch and ClearTek are trademarks of 3M. Printed in USA 3M 2008 TouchPen-0508