3M Shielded Controlled Impedance (SCI)
.100 Cable Assemblies
.100 inch (2.54 mm) center spacing
Mates with standard 3M two-pin headers
Supplied as a completed assembly
Stand-Alone version
Available in right angle and straight
configurations with optional polarization
feature
Right angle connector has optional two-pin
header latch
Carrier version
Available only in straight configuration
designed for use with the 3M SCI carrier
system
Date Modified: September 23, 2005
TS-0803-05
Sheet 1 of 3
Physical
(Connector Insulation) Material: Thermoplastic
Flammability: UL 94V-0
(Connector Contact) Material: Beryllium Copper
Plating:
50/50 Au/Ni (1.27/1.27 m Au/Ni)
(Connector Shieldbox) Material: Copper Zinc Alloy
Plating: Solderable Nickel
Electrical
Current Rating:
1 A
9
Insulation Resistance:
>5 x 10
Withstanding Voltage:
500 V AC
Characteristic Impedance:
See cable types
Mechanical
Center Spacing:
.100 (2.54 mm)
Mating Pin Dimensions:
.024 min/.026 max (0.61 mm/0.665 mm)
Mating Pin Length 20, 21, 22, 23:
.23 nom (5.80 mm); 24: .21 nom (5.02 mm)
Contact Mating Point 20, 21, 22, 23:
.13 (3.40 mm); 24: .10 (2.60 mm)
Connector Insertion Force:
2.3 N max [Pin:0.025 (0.63 mm)]
Connector Withdrawel Force:
1.5 N min [Pin:0.025 (0.63 mm)]
Cable Retention Force:
50 N min
Durability (Insertion/Withdrawal):
500 cycles
Environmental
Temperature Rating:
22, 23: -55 to +105C; 24: -55 to +125C
UL File No.: E86982 (Optional)
3M
3M is a trademark of 3M Company.
Interconnect Solutions For technical, sales or ordering information call
3M Shielded Controlled Impedance (SCI)
.100 Cable Assemblies
Connector Types
Carrier Version
Type 24
Stand Alone Version
Type 23
.604
[ 15.35 ]
.604
[ 15.35 ]
.082
.174 [ 4.43 ]
[ 2.08 ]
.174 [ 4.43 ]
.088 [ 2.25 ]
Ground
.11 [ 2.80 ]
.012 [ 0.30 ]
Signal
.073
Ground
[ 1.85 ]
.100 [ 2.54 ]
.039 [ 1.0 ]
Signal
.100 [ 2.54 ]
Inch
[mm]
Tolerance Unless Noted
.0
.00 .000
Inch .1 .005
.01
Right Angle Version
Type 22
[ ] Dimensions for
Reference only
.063 [ 1.60 ]
.472
[ 12.00 ]
Example Assembly
.174 [ 4.43 ]
.088
[ 2.25 ]
.012 [ 0.30 ]
Ground
Length
Assembly Tolerances:
<10:1/4
.039 [ 1.0 ]
10 to 36:
1/2
Signal
.100 [ 2.54 ]
36 to 120:
1
>120:2
Minimum Length:
4.3
Ordering Information
98XXXX-XXX-XXX.X-X X X
USA and Canadian
Certification
Left Connector Type/Right Connector Type
Y = Yes
22 = Right angle, nonpolarized
N = No
23 = Straight, nonpolarized
24 = Carrier version, straight
Ground Pattern
Length
S = Signals as indicated on connector dwg
Cable Type
(inches)
Z = Customer special ground pattern
017 = 50
027 = 50 Low capacitance (Consult Factory)
041 = 75
XXX = For other cable options
Harness Required
contact 3M (if non standard)
A = Multiple Assy's Harnessed
0 = Single Assembly Only
TS-0803-05
Sheet 2 of 3
3M
3M is a trademark of 3M Company.
Interconnect Solutions
For technical, sales or ordering information call