9890-1 3M

Technical Data September, 2010 3M Thermally Conductive Adhesive Transfer Tapes 9882 9885 9890 Product Description 3M Thermally Conductive Adhesive Transfer Tapes 9882, 9885, and 9890 are designed to provide a preferential heat- transfer path between heat-generating components and heat sinks or other cooling devices (e.g., fans, heat spreaders or heat pipes). These tapes are pressure sensitive adhesives loaded with thermally conductive ceramic fillers. Pressure is needed to form a bond. Heat and pressure may be needed on some substrates to achieve an acceptable bond. The specialized acrylic chemistry of these tapes provide for good thermal stability of the base polymer. The thermally conductive tapes are on a silicone treated polyester release liner for ease of handling and die cutting. The tapes offer both good thermal conductivity and good electrical insulation properties. Tapes 9882, 9885, and 9890 provide best adhesion results when used with high surface energy substrates. If using low surface energy material, 3M Thermally Conductive Adhesive Transfer Tapes 8805, 8810, 8815, or 8820 could provide a higher adhesion bond and improved wet-out of the surface.. Product Construction 3M Thermally Conductive Adhesive Transfer Tapes Product Number 9882 9885 9890 Color Grey Tape Type Filled Acrylic Polymer Tape Thickness 2 mils (0.05 mm) 5 mils (0.13 mm) 10 mils (0.25 mm) Filler Type Ceramic Liner Type Single Liner using Silicone-Treated Polyester Liner Thickness 2 mil (50 m) 3 3M Thermally Conductive Adhesive Transfer Tapes 9882 9885 9890 Typical Physical Properties and Performance Characteristics Note: The following technical information and data should be considered representative or typical only and should not be used for specification purposes. 3M Thermally Conductive Adhesive Transfer Tapes Product Number 9882 9885 9890 Property Value Method 2 Thermal Impedance (C-in. /W) 0.35 0.50 0.90 3M test method Thermal Conductivity (W/m-K) 0.60 ASTM C-177 3 Specific Gravity 2g/cm Coefficient of Thermal Expansion CTE 23C to 150C = 400ppm/C ASTM D-3386 (CTE) CTE -55C = 250ppm/C 14 Volume Resistivity ( -cm) 2 x 10 ASTM D-257 Dielectric Strength (Volts/mil) 750 Volts / mil (9890 Tested) ASTM D-149 Dielectric Properties (frequency) 1 kHz 1 MHz ASTM D-150 Dielectric Constant (9890) 6 5 90 Degree Peel Test (oz/in) 9882 9885 9890 Untreated aluminum substrate 3M test method Room Temp Dwell 15 min 6 - 13 1 mil PET Backing Ref: ASTM D-3330 65C Dwell 15 min 14 - 22 12 in/min and 90 Degree Peel Room Temp Dwell 72 hrs 19 - 31 65C Temp Dwell 72 hrs 16 - 33 3M test method: Static Shear test of holding PASS PASS PASS SS & PET 2 1000g Room Temp using 1 in Hold weight 1 week 3M test method: Static Shear test of holding PASS PASS PASS SS & PET 2 500g 70C using 1 in Hold weight 1 week Shelf Life Product shelf life is 2 years from date of manufacture when stored at room temperature conditions (72F 22C and 50% RH) in the products original packaging. Available Sizes Width: Maximum width 22 inches. Length: Multiples of 36 yds. 108 yds. maximum. Custom Sizes: Contact your local 3M sales representative for information and availability of custom sizes (width and length) or die cut parts. (2)