98-KC 11 3M

Technical Data Sheet 3 98-KC 11 Cold Shrink Connector Sealing kit 1. Product Description TM The 3M 98-KC 11 provides the correct Cold Shrink tube to make the installation of coax and low voltage connectors seals easy. The installation does not require tooling, and the quality of the installation is less installer dependant. TM 3M Cold Shrink tubes are open ended, silicone rubber, tubular sleeves. The sleeves are factory expanded and assembled on a removable supporting plastic core. Each rubber assembly is supplied for field installation in this pre-stretched condition. As the core is unwound, the insulating sleeve shrinks to form a tight seal. 2. Applications The Cold Shrink tube is made from special Silicone rubber material to provide an environmental seal and electrical insulation on the connector. The connector area is covered by silicone tube to provide mechanical and electrical protection during handling of the prepared cables and exercise. Insert Company Reference: AABBCC01141 EN 01 Issue date 17.11.2016 Supersedes new address before issue 3M 2014 All Rights Reserved. Page 1 of 4 Template-EMD-EU-1Column Dec.2015 Technical Data Sheet 3. Typical Properties 3.1 Performance Test The 3M 98-KC 11 kit passed the 100 kPa water pressure sealing test and met IEC 529 IP x8 requirements. 3.2 Physical Characteristics Characteristic Standard Unit Value (nominal) DIN 53 505 Shore A 40 Hardness Black Appearance DIN 53 479 A g/cm 1,11 Specific gravity DIN 53 504 S1 N/mm 10,2 Tensile strength Elongation at break DIN 53 504 S1 % 850 ASTM D 624 B N/mm 25 Tear resistance DIN 53 512 % 58 Rebound resilience DIN ISO 815-B % 20 Compression set (22h / 175C) IEC 60250 KV/mm > 10 Dielectric strength 14 Volume resistivity IEC 60093 Ohm cm > 1 x 10 4. User Information 4.1 Product Features Feature Benefit Cold Shrink technology No (heating) tools needed Safer and quicker installation Proven Silicone material Reliable sealing - Easy to remove Total product line A solution for any application Tested application Reliable installation Application temperature - 20C + 50C Working temperature 130C max External environmental condition UV resistant Insert Company Reference: AABBCC01141 EN 01 Issue date 17.11.2016 Supersedes new address before issue 3M 2014 All Rights Reserved. Page 2 of 4 Template-EMD-EU-1Column Dec.2015