Technical Data August 2014 3M EMI Absorber AB5000SHF Series (Halogen Free) Product Description 3M EMI Absorber AB5000SHF Series (Halogen Free)* consists of flexible soft metal flakes filler loaded polymer resin and acrylic pressure sensitive adhesive. 3M absorber AB5000SHF series is available in sheet type. Features and Benefits Polymer resin and metal flakes filler Acrylic pressure sensitive adhesive Supplied on a removable liner for easy handling and die-cutting Applications 3M absorber AB5000SHF series is typically used for appli-cations requiring electromagnetic absorbing performance. These absorbers are useful for electrical devices for broad-band radio frequency range (mobile phone, PDA, PC, BS/CS tuner, LAN, medical and military devices). This absorber series suppresses radiated noise from electrical devices for broadband radio frequency range. Common uses include mobile phone (SAR reduction), computer, digital still camera, RF block, military equipments for radar avoidance and stealth performance. Attenuation and Power Loss Many factors determine the true attenuation of an electromagnetic absorbing material, including shape and thickness, intimacy of substrate contact, smoothness of application surface, strength and frequency of the EMI signal, etc. However, using standard tests and fixtures, it is possible to determine a value for the signal attenuation. 3M absorber AB5000SHF series typical attenuation range is dependent on thickness. * H alogen Free is defined as having maximum 900 ppm bromine, maximum 900 ppm chlorine, and/or maximum 1500 ppm total bromine and chlorine, per IEC 61249-2-21. 3M EMI Absorber AB5000SHF Series (Halogen Free) 3M EMI Absorber AB5000SHF Series Typical Properties Note: T he following technical information and data should be considered representative or typical only and should not be used for specification purposes. Properties Typical Value Type of Backing Polymeric resin with magnetic metal flake filler Type of Adhesive Acrylic non-conductive pressure sensitive adhesive (PSA) Product Number AB5010SHF AB5020SHF AB5030SHF AB5050SHF AB5100SHF 1 Thickness 0.10mm 0.20mm 0.30mm 0.50mm 1.00mm Standard Packaging 210mm x 297mm Temperature Range -25 ~ 85C 2 6 Surface Resistivity 1 x 10 (min) Thermal Conductivity 0.7 W/mK 3 Tensile Strength 6.0 MPa (min) Attenuation (S11 Reflection Refer to attached chart 4 Loss) and Power Loss 1 T his value does not contain a double side adhesive tape thickness. Typical adhesive tape thickness is 50 m (AB5010S contains 30 m adhesive). 2 Test method: ASTM D257. 3 Test method: JIS K 6521. 4 A ttenuation measured by 7mm coaxial verification kit under short fixed condition. Power loss measured by 50 microstrip line. (2)