W Highland Terminals C L E BF10-6 thru BF18-10 Block Fork, Non-Insulated, Butted Seam Data Sheet Wire Product Range Stud Barrel Barrel Number (AWG)SWize C L E Thickness Length I.D. B0F10-6 162-1 09.3203.204.700.505.04 05.2 0.13 B0F10-8 182-1 09.3203.204.700.505.04 05.2 0.13 B0F10-10102-1 1209.303.204.700.505.04 05.2 0.13 BF14-6 16-14 8 0.25 0.25 0.65 0.50 0.030 0.25 0.090 B4F14-8 186-1 05.3005.200.600.505.03 00.2 0.09 B4F14-10106-1 1005.305.200.600.505.03 00.2 0.09 BF18-6 22-18 6 0.25 0.25 0.65 0.50 0.030 0.25 0.070 . . B8F18-8 282-1 05.3005.200.600.505.03 00.2 0.07 B8F18-10202-1 1005.305.200.600.505.03 00.2 0.07 Installation Information WARNING CANADIAN STANDARDS Turn power off before installing or removing terminal. All electrical UNDERWRITERS work should be done according to appropriate electrical codes. ASSOCIATION LABORATORIES STANDARD NO. C22.2 STANDARD NO. UL 486A NO. 0. 65 3M FILE NO. E23438 UL Listed and CSA Certified for use on stranded copper 3M FILE NO. LR22190 (AWG) wire only. Strip away the end 3/8 inch of wire insulation. Specifications Make the crimp in the proper station of a recommended 3M crimp tool: TH-440, TH-450 (scissor style), or Wire Size: See Table Above Barrel Seam: Butted TR-490 (ratchet style) hand tools. Max. Current: Same as Wire Terminal Material: ETP Copper Plating: Tin Barrel Crimp (Electrical)Engineering Specification The non-insulated, butted seam block fork terminal Crimp-type terminals shall, electrically and shall be tin-plated, annealed copper, with the tongue mechanically, connect to a pre-stripped end of a stranded having a specified stud slot (size 6 thru 10) and a butted copper wire and have a flat tongue portion with a seam barrel with a beveled I.D. for ease of stranded central opening for mounting around a screw or stud. wire entry, sized for a specified (AWG) wire range (22- 18, 16-14, 12-10). The terminal line shall offer tongue variations in hole (stud) size (6, 8 10, etc.) and configuration (ring, fork, Non-insulated terminals shall be UL Listed and CSA block fork, flanged block fork, locking fork, etc.): and Certified. barrel variations in wire (AWG) size (22-18, 16-14, 12-10, etc.) and construction (non-insulated brazed seam, vinyl insulated butted seam, nylon insulated with insulation grip, etc.). The terminal line shall have regulatory agency coverage (UL Listing, CSA Certification). The terminal tongue shall be marked with the wire range and manufacturers symbol ( ). 3M and Highland are trademarks of 3M Company. IMPORTANT NOTICE Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Warranty Limited Remedy Limited Liability. This product will be free from defects in material and manufacture as of the date of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3Ms option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect, special, incidental or consequential regardless of the legal theory asserted. Electrical Products Division 6801 River Place Blvd. Austin, TX 78726-9000 Litho in USA.