Highland Terminals L BSV10, BSV14, BSV18 Butt Connector, Vinyl Insulated, Butted Seam Data Sheet Product Wire Range Barrel Barrel Number (LAWG) Thickness Length I.D. B0SV10 122-1 10.0 05.04 00.2 0.25 B4SV14 106-1 10.0 05.03 00.2 0.17 B8SV18 202-1 10.0 05.03 05.2 0.14 Installation Information WARNING UNDERWRITERS CANADIAN STANDARDS Turn power off before installing or removing terminal. All electrical LABORATORIES ASSOCIATION work should be done according to appropriate electrical codes. STANDARD NO. UL 486C STANDARD NO. 22.2 3M FILE NO. E23438 NO. 0, 65 3M FILE NO. LR22190 UL Listed and CSA Certified for use on stranded copper (AWG) wire only. Strip away the end 3/8 inch of wire insulation. Specifications Wire Size: See Table Above Make the crimp in the proper station of a Barrel Seam: Butted recommended 3M crimp tool: TH-440, TH-450 Insulator Max. Volt Rating: 600 V Building Wire: (scissor style) or TR-490 (ratchet style) hand tools. 1000 V Signs or Fixtures (Luminaires) Maximum Operating Temp.: 221F (105C) Maximum Current: Same as Wire Barrel Crimp (Required) Insulator Material: Vinyl Terminal Material: ETP Copper Terminal Plating: TinEngineering Specification Crimp-type terminals shall, electrically and The vinyl insulated, butted seam butt connector shall mechanically, connect permanently to the pre-stripped be tin-plated, annealed copper, having a double-length, end of two stranded copper wires. round barrel with a center stop and a close fitting vinyl tube covering, color coded and sized for a specified The connector line shall offer barrel variations in wire (AWG) wire range (22-18, 16-14, 12-10). (AWG) size (22-18, 16-14, 12-10) and construction (non-insulated brazed seam, vinyl insulated butted Insulated connectors shall be UL Listed and CSA seam, nylon insulated seamless, etc...). The connector Certified for 600 volts maximum, building wire: 1000 line shall have regulatory agency coverage (UL volts maximum, signs or fixtures and temperature rated Listing, CSA Certification). The connectors shall be 221F (105C) maximum. marked with the wire range and manufacturers symbol ( ). 3M and Highland are trademarks of 3M IMPORTANT NOTICE Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Warranty Limited Remedy Limited Liability. This product will be free from defects in material and manufacture as of the date of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3Ms option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect, special, incidental or consequential regardless of the legal theory asserted. Electrical Products Division 6801 River Place Blvd. Austin, TX 78726-9000 Litho in USA.