CABLE ACCESSORY PRODUCTS Cable Accessory Products Splice Rejacketing 387 Splice Repair 390 3 M Safety Sock Grounding Kits, Shielded and Jacketed URD Cable 391 Sealing and Grounding 393 3/C Cable Breakout Boots and 3/C Phase Rejacketing System 395 Insulating and Sealing Compounds 408 Offers accessory products to assist with splice rejacketing, Mounting Brackets 410 cable jacket sealing, grounding and cable preparation. 3M Cold Shrink Corrosion Protection Kit Many of the products shown here are used with 3M splices CPT Series 411 and terminations. Remember to reference those sections for Preparation and Cleaning 413 more product information. 3M Electrostatic Animal Guard 415 Overhead Conductor Animal Guard Cover 416 Complete care for any kind of cable FAX 800-245-0329 386Splice Rejacketing When jacketed concentric neutral cable (JCN) is spliced, it is necessary to cover the junction between the cable jackets with a water resistant rejacket. 3M offers three designs for splice rejacketing: cold shrink one piece sleeve, cold shrink stacked sleeve, and heat shrink adhesive-lined sleeves. 3M Heat Shrinkable Splice Jacket Kits HSJ Series 3M Cold Shrink Splice Jacket Kits Designed to rejacket molded rubber splices, the SJ-SS SJ-1A, SJ-2A, SJ-3A Series kits are made of EPDM rubber. This unique two- Cold shrink jacket kits offer advanced, one-piece, water- piece design allows the two tubes to stac on top of tight rejacketing for JCN cable splices. Designed as an each other during installation, requiring less space in the accessory kit to re-jacket over molded rubber splices, manhole or ditch to make the splice. Each kit contains the SJ Series is made from durable EPDM rubber. one small cold shrink tube, one large cold shrink tube, one profile bushing and one roll of Scotch Mastic Tape 2228. 3M Cold Shrink jacket kits SJ-1A, SJ-2A and SJ-3A offer SJ-1SSR and SJ-2SSR are specially sized for repair splices. advanced, one-piece, water-tight rejacketing for JCN shielded power cable splices. The SJ series accommodates Each kit jackets one splice. voltage classicfi ations of 15 kV, 25 kV and 35 kV. 3M Cold Shrink Foldback In addition to the open-ended, tubular rubber sleeve, Splice Jacket Kits SJ-FB each kit includes Scotch Rubber Mastic Tape, which is 3M Cold Shrink Foldback Splice Jacket Kits SJ-FB Series used to adjust cable O.D. and provide a sure, long-lasting are a series of folded back, tubular rubber sleeves that seal between the cable jacket and the cold shrink sleeve, combined with Scotch Rubber Mastic Tape 2228 provide as well as sealing around the cable ground conductor. a sealed jacket over cable splices installed on jacketed This unique, cold shrink rejacketing kit eliminates the need power cable. These kits are similar to the FB tubes in the for dangerous torches or special tooling. 3M Cold Shrink QS III splice kits. Each kit jackets one splice. The Scotch Rubber Mastic Tape 2228 provides for an assured sealing interface between the cable jacket and Cold 3M Cold Shrink SJ-SS Series Stacked Shrink Foldback Jacket Tube. Mastic strips are also used Sleeve Splice Jacket Kits SJ-1SS, to seal around the optional, external ground conductor. SJ-2SS, SJ-3SS The jacketing tube is made from EPDM rubber that contains Cold Shrink Jacket Kits SJ-1SS, SJ-2SS and SJ-3SS are no chlorides or sulfurs. The completed jacket tube will be two-piece, water tight rejacketing kits for JCN cables. continuous from cable jacket to cable jacket, with no seams. Four kit sizes cover an application range from 4 AWG, 15 kV to sizes larger than 4/0 AWG, 35 kV. 3M Heat Shrinkable Splice Jacket Kits HSJ Series HSJ Series Heat Shrinkable Splice Jackets are adhesive 3M Cold Shrink SJ-SS Series Stacked Sleeve Splice Jacket Kits SJ-1SS, lined for water-tight rejacketing of JCN cable splices. SJ-2SS, SJ-3SS Each kit covers one splice. 387 PHONE 800-245-3573