3M CF Card Header CompactFlash Type I, Low Profile, Surface Mount 7E50 Series Meets CFA standards 4.0 mm low profile height Single row solder tails with 0.635 mm spacing Ejector option for easy removal of CF Card See Regulatory Information Appendix (RIA) for chemical compliance information Date Modified: September 19, 2007 TS-0747-C Sheet 1 of 3 Physical Insulation Material: Liquid Crystal Polymer (LCP) Flammability: UL 94V-0 Color: Beige Contact Material: Copper Alloy Plating Underplating: 100 2.54 m Nickel Wiping Area: Gold Flash over 80/20 Palladium Nickel, Lubricated (see Ordering Information) Solder Tails: Gold Flash (see Ordering Information) Marking 3M Logo, Part Number, Date Code Electrical Current Rating: .5 A 9 >1 10 at 500 V DC Insulation Resistance: 8 >1 10 at 500 V after Environmental Conditioning DC 500 V at Sea Level Withstanding Voltage: RMS Environmental Temperature Rating: -55C to +85C Process Rating: Maximum 260C (per J-STD-020C) CompactFlash is a registered trademark of the SanDisk Corporation. UL File No.: E68080 3 3M is a trademark of 3M Company. Interconnect Solutions For technical, sales or ordering information call 3M CF Card Header CompactFlash Type I, Low Profile, Surface Mount 7E50 Series Pin Type Interface Dim A Pin No. detect 3.50 .138 25, 26 general 4.25 .167 all other pins power 5.00 .197 1, 13, 38 & 50 38.74 1.525 32.84 1.293 0.635 .0250 Typ 2X 0.9 .04 2X 2.20 0.30 .012 Typ 4.50 .177 .087 1.0 .04 6.00 .236 2X 3.3 .13 15.6 .614 13.7 .54 1.5 .06 1.5 .06 0.44 Typ A .017 1.37 .054 6.70 .264 4.0 .16 43.03 1.694 45.0 1.77 Section A-A 48.0 1.89 30.48 1.200 Pin 26 1.27 Typ .050 Pin 50 Pin 38 1.27 Typ mm 1.40 .050 Inch Pin 25 Pin 1 .055 Pin 13 Tolerance Unless Noted .79 (See note) .031 .000 .00 .0 2X .89 (See note) .035 mm .3 .15 Dimensions for Reference only Note: Inverse ( Option A ) style shown. For Normal style rotate polarization keys and pin call outs 180. Ordering Information N7E50-X516XX-30 (RIA E1 & C1 apply) Options: Plating Options: CF Card Polarization / Solder Tabs / Ejector: PG = Au Flash over 25 0.64 mm PdNi Lubricated with Au Flash tails. A = Inverse / with solder tab / ejector acceptable Available for product option only. C = Normal / without solder tab / ejector not acceptable PK = Au Flash over 20 0.5 m PdNi Lubricated with Au flash tails D = Normal / with solder tab / ejector not acceptable E = Normal / with solder tab / ejector acceptable TS-0747-C Sheet 2 of 3 3 3M is a trademark of 3M Company. Interconnect Solutions For technical, sales or ordering information call