3M ELECTRICAL MOISTURE BLOCK (EMB) 04/30/21 Article Information Sheet Copyright,2021, 3M Company. All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit thereon. This Article Information Sheet is provided as a courtesy in response to a customer request. A Safety Data Sheet (SDS) has not been prepared for these product(s) because they are articles. Articles are not subject to the Occupational Safety and Health Administrations Hazard Communication Standard (29 CFR 1910.1200(b)(6)(v)). As defined in this standard: Article means a manufactured item other than a fluid or particle: (i) which is formed to a specific shape or design during manufacture (ii) which has end use function(s) dependent in whole or in part upon its shape or design during end use and (iii) which under normal conditions of use does not release more than very small quantities, e.g., minute or trace amounts of a hazardous chemical, and does not pose a physical hazard or health risk to employees. Document Group: 05-9595-9 Version Number: 1.04 Issue Date: 04/30/21 Supercedes Date: 02/01/18 SECTION 1: Identification 1.1. Product identifier 3M ELECTRICAL MOISTURE BLOCK (EMB) Product Identification Numbers 80-6104-5623-0, 80-6105-6745-7, 80-6108-4324-7, 80-6108-6647-9, 80-6109-1256-2, 80-6109-1850-2 7000058073, 7100164490 1.2. Recommended use and restrictions on use Recommended use Electrical, electrical moisture sealant 1.3. Suppliers details MANUFACTURER: 3M DIVISION: Electrical Markets Division International Operations ADDRESS: 3M Center, St. Paul, MN 55144-1000, USA Telephone: 1-888-3M HELPS (1-888-364-3577) 1.4. Emergency telephone number 1-800-364-3577 or (651) 737-6501 (24 hours) SECTION 2: Hazard identification This product is exempt from hazard classification according to OSHA Hazard Communication Standard, 29 CFR 1910.1200. SECTION 3: Composition/information on ingredients Ingredient C.A.S. No. % by Wt Page 1 of 53M ELECTRICAL MOISTURE BLOCK (EMB) 04/30/21 ALUMINA TRIHYDRATE 21645-51-2 35 - 50 POLYBUTYLENE 9003-29-6 5 - 20 DISTILLATES (PETROLEUM), C3-6, PIPERYLENE- 152698-66-3 5 - 15 RICH, POLYMERS WITH ISOBUTYLENE LIMESTONE 1317-65-3 1 - 10 MAGNESIUM CARBONATE 546-93-0 5 - 10 Polyisobutylene 9003-27-4 1 - 10 BIS(2-ETHYLHEXYL) TETRABROMOPHTHALATE 26040-51-7 < 5 ETHYLENE-PROPYLENE- 25038-36-2 < 5 ETHYLIDENENORBORNENE TERPOLYMER ISOBUTYLENE-ISOPRENE POLYMER 9010-85-9 < 5 OXIDIZED PETROLEUM ASPHALT 64742-93-4 < 5 ANTIMONY PENTAOXIDE 1314-60-9 < 1 CALCIUM CARBONATE 471-34-1 < 1 CARBON BLACK 1333-86-4 < 1 POLYOXYETHYLENE TALLOW AMINE 61791-26-2 < 0.1 SECTION 4: First aid measures 4.1. Description of first aid measures Inhalation: No need for first aid is anticipated. Skin Contact: No need for first aid is anticipated. Eye Contact: No need for first aid is anticipated. If Swallowed: No need for first aid is anticipated. SECTION 5: Fire-fighting measures In case of fire: Use a carbon dioxide or dry chemical extinguisher to extinguish. SECTION 6: Accidental release measures 6.1. Personal precautions, protective equipment and emergency procedures Not applicable. 6.2. Environmental precautions Not applicable. 6.3. Methods and material for containment and cleaning up Not applicable. SECTION 7: Handling and storage 7.1. Precautions for safe handling This product is considered to be an article which does not release or otherwise result in exposure to a hazardous chemical under normal use conditions. Page 2 of 5