3 Highland Terminals W FDI14-250, FDI18-250 W Female Disconnect, Nylon Fully Insulated, D Butted Seam L Data Sheet Wire Maximum Product Range Mates with Male Tab Barrel Barrel Insulation Number (AWG) W idth (W)Lx Thickness WD Length I.D. Diameter F4DI14-250126-107.250 x 0.03 07.803.305.200.205.08 0.14 F8DI18-250222-107.250 x 0.03 07.803.305.200.205.08 0.14 Installation Information WARNING CANADIAN STANDARDS UNDERWRITERS Turn power off before installing or removing terminal. All electrical work should be done according to appropriate electrical codes. ASSOCIATION LABORATORIES STANDARD NO. 22.2 STANDARD NO. UL 310 NO. 153 3M FILE NO. E70512 UL Listed and CSA Certified for use on stranded copper 3M FILE NO. LR22190 (AWG) wire only. Strip away the end 3/8 inch of wire insulation. Make the crimp in the proper station of a recommended 3M crimp tool: TH-440, TH-450 (scissor style), or TR-490 (ratchet style) hand tools. Specifications Wire Size: See Table Above Barrel Seam: Butted Maximum Voltage Rating: 600 V Building Wire 1000 V signs or Barrel Crimp (Electrical) fixtures (Luminaires) Maximum Operating Temp: 221F (105C) Maximum Current: Same as Wire Insulator Material: Nylon Terminal Material: Brass Suitable for factory installation on steel or brass tabs, Plating: Tin UL and CSA. Suitable for field application on brass tabs, strain relief is required, UL only.Engineering Specification Crimp-Type Female Disconnect Terminals shall, The Nylon Fully Insulated 0.250 Female Disconnect electrically and mechanically, connect permanently to shall be tin plated 0.020 thick brass with a tongue for a prestripped end of a stranded copper wire: and have a gripping a 0.250 x 0.032 per ANSI/NEMA CD-2 and tongue portion with fingers which grip a Male a 0.25 long barrel covered by a nylon funnel entry Disconnect in a separable, reusable manner, forming sleeve, which extends to cover the tongue, color coded a Quick Connect Wiring Termination. and sized for a specified (AWG) wire range (22-18, 16-14). The connector line shall offer tongue variations (sized to grip Male Tabs: 0.187 x .0.250) and barrel Insulated connectors shall be UL Listed and CSA variations in construction (non-insulated, nylon Certified for 600 V building wire: 1000 V signs or insulated with insulation grip, etc.). The tongue lighting fixtures (luminaires) and temperature rated portion shall be marked with the wire range and 221F (105C) maximum. manufacturers symbol ( ). Female Disconnects shall be suitable for field or factory wiring, with a UL Recognized strain relief required. 3M and Scotchlok are trademarks of 3M IMPORTANT NOTICE Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Warranty Limited Remedy Limited Liability. This product will be free from defects in material and manufacture as of the date of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3Ms option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect, special, incidental or consequential regardless of the legal theory asserted. Electrical Products Division 6801 River Place Blvd. Austin, TX 78726-9000 Litho in USA. 3M 2002 78-8126-0635-4-A