3 W Highland Terminals L FDV14-250, FDV18-250 Female Disconnect, Vinyl Insulated, Butted Seam Data Sheet Wire Maximum Product Range Mates with Male Tab Barrel Barrel Insulation Number (AWG) W idth (W)Lx Thickness Length I.D. Diameter F4DV14-250126-107.250 x 0.03 05.800.205.08 0.14 F8DV18-250222-107.250 x 0.03 05.800.205.08 0.14 Installation Information WARNING Turn power off before installing or removing terminal. All electrical UNDERWRITERS CANADIAN STANDARDS work should be done according to appropriate electrical codes. LABORATORIES ASSOCIATION STANDARD NO. UL 310 STANDARD NO. 22.2 3M FILE NO. E70512 NO. 153 UL Listed and CSA Certified for use on stranded copper 3M FILE NO. LR22190 (AWG) wire only. Strip away the end 3/8 inch of wire insulation. Make the crimp in the proper station of a recommended 3M crimp tool: TH-440, TH-450 (scissor style), or TR-490 (ratchet style) hand tools. Specifications Wire Size: See Table Above Barrel Seam: Butted Maximum Voltage Rating: 600 V Building Wire 1000 V signs or Barrel Crimp (electrical) fixtures (Luminaires) Maximum Operating Temp: 221F (105C) Maximum Current: Same as Wire Insulator Material: Vinyl Terminal Material: Brass Suitable for factory installation on steel or brass tabs, Plating: Tin UL and CSA. Suitable for field application on brass tabs, strain relief is required, UL only.Engineering Specification The Vinyl Fully Insulated 0.250 Female Disconnect Crimp-Type Female Disconnect Terminals shall, elec- shall be tin plated 0.020 thick brass with a tongue for trically and mechanically, connect permanently to a gripping a 0.250 x 0.032 per ANSI/NEMA CD-2 prestripped end of a stranded copper wire: and have a and a 0.25 long barrel covered by a vinyl funnel tongue portion with fingers which grip a Male entry sleeve, color coded and sized for a specified Disconnect in a separable, reusable manner, forming a (AWG) wire range (22-18, 16-14). Quick Connect Wiring Termination. Insulated connectors shall be UL Listed and CSA The connector line shall offer tongue variations (sized Certified for 600 V building wire: 1000 V signs or to grip Male Tabs: 0.250 x .0.032 or 0.187 x 0.020 lighting fixtures (luminaires) and temperature rated per ANSI/NEMA CD-2) and barrel variations in wire 221F (105C) maximum. (AWG) size (22-18, 16-14, 12-10) and construction (non-insulated, vinyl insulated, nylon fully insulated, Female Disconnects shall be suitable for field or fac- etc.). The female disconnects shall have regulatory tory wiring, with a UL Recognized strain relief agency coverage (UL Listed and CSA Certified). The required. tongue portion shall be marked with the wire range and manufacturers name or trade mark ( ). 3M and Scotchlok are trademarks of 3M IMPORTANT NOTICE Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Warranty Limited Remedy Limited Liability. This product will be free from defects in material and manufacture as of the date of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3Ms option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect, special, incidental or consequential regardless of the legal theory asserted. Electrical Products Division 6801 River Place Blvd. Austin, TX 78726-9000 Litho in USA. 3M 2002 78-8126-0639-6-A