8 7 6 5 4 3 2 1 NOTES TM 3M ROUND CONDUCTOR FLAT CABLE, HF365 SERIES 1. REGULATORY INFORMATION: * LOW SMOKE ZERO HALOGEN (LSZH) INSULATION. ADVANTAGES .050 28 AWG STRANDED, HALOGEN FREE PO VISIT 3M.com/regs OR CONTACT OF LSZH INSULATION ARE THE LOW SMOKE (IEC 61034-2-2005) YOUR 3M REPRESENTATIVE TO FIND AND LOW TOXICITY OF COMBUSTION GASES (NF X 70-100-2-2006), THE RoHS COMPLIANCE STATUS OF REDUCING THE RISK TO FIREFIGHTERS AND REDUCING THE SOOT THE 3M PART YOU ARE INTERESTED AND CORROSION DAMAGE TO NEARBY EQUIPMENT. IN. * 28 AWG WIRE ON .050 INCH CENTERS PERMITS MASS TERMINATION 2 IN THE EVENT OF CONFLICT TO BROAD LINE OF IDC CONNECTORS. BETWEEN THIS DATA AND THAT CONTAINED IN THE PRODUCT DIM. * ZIPPABLE FOR BRANCHING OR DISCRETE TERMINATION. SPECIFICATION, THE PRODUCT D D SPECIFICATION TAKES PRECEDENT. DIM. TABLE 1 NUMBER OF 3M PART DIM. DIM. CONDUCTORS NUMBER .025 .007 .050 .002 04 HF365/04 .200+/-.010 5.08 .150+/-.007 3.81 0.64 0.18 1.27 0.05 06 HF365/06 .300+/-.010 7.62 .250+/-.007 6.35 TYP. 08 HF365/08 .400+/-.010 10.16 .350+/-.007 8.89 09 HF365/09 .450+/-.010 11.43 .400+/-.007 10.16 10 HF365/10 .500+/-.010 12.70 .450+/-.007 11.43 11 HF365/11 .550+/-.010 13.97 .500+/-.007 12.70 12 HF365/12 .600+/-.010 15.24 .550+/-.007 13.97 14 HF365/14 .700+/-.010 17.78 .650+/-.007 16.51 .035 .003 15 HF365/15 .750+/-.010 19.05 .700+/-.007 17.78 HALOGEN FREE PO 28 AWG 7 X 36 (7 X .127) TINNED 16 HF365/16 .800+/-.015 20.32 .750+/-.011 19.05 0.89 0.08 STRANDED COPPER CONDUCTORS 18 HF365/18 .900+/-.015 22.88 .850+/-.011 21.59 20 HF365/20 1.000+/-.015 25.40 .950+/-.011 24.13 C C 24 HF365/24 1.200+/-.015 30.48 1.150+/-.011 29.21 NOTE: 25 HF365/25 1.250+/-.015 31.75 1.200+/-.011 30.48 BLUE MARKING ON ONE EDGE OF CABLE DESIGNATES WIRE 1. 26 HF365/26 1.300+/-.015 33.02 1.250+/-.011 31.75 30 HF365/30 1.500+/-.020 38.10 1.450+/-.015 36.83 34 HF365/34 1.700+/-.020 43.18 1.650+/-.015 41.91 36 HF365/36 1.800+/-.020 45.72 1.750+/-.015 44.45 37 HF365/37 1.850+/-.020 46.99 1.800+/-.015 45.72 2 PHYSICAL: 40 HF365/40 2.000+/-.020 50.80 1.950+/-.015 49.53 JACKET MATERIAL: HALOGEN FREE POLYOLEFIN (PO) 44 HF365/44 2.200+/-.020 55.88 2.150+/-.015 54.61 COLOR: DARK GRAY 50 HF365/50 2.500+/-.020 63.50 2.450+/-.015 62.23 60 HF365/60 3.000+/-.020 76.20 2.950+/-.015 74.93 MARKING: STANDARD: NONE 64 HF365/64 3.200+/-.020 81.28 3.150+/-.015 80.01 CONDUCTORS: 28 AWG 7 X 36AWG 7 X .127 TINNED STRANDED COPPER 2 ELECTRICAL: VOLTAGE RATING: USA 300V CANADIAN 150V EU: <50V 10 INSULATION RESISTANCE: >1 X 10 /10ft. 3m ORDERING INFORMATION UNBALANCED BALANCED B B CHARACTERISTIC IMPEDANCE: 100 168 HF365/XX XX CAPACITANCE: 15.0 pF/ft 49.2 pF/m 8.4 pF/ft 27.7 pF/m INDUCTANCE: .15 H/ft .49 H/m .24 H/ft .79 H/m BLANK= STANDARD PROPAGATION DELAY: 1.51 ns/ft 4.95 ns/m 1.42 ns/ft 4.66 ns/m SF= SPLICE FREE 72% VELOCITY OF PROPAGATION: 68% No. OF CONDUCTORS: NOTE: UNBALANCED IS MEASURED BETWEEN GROUND-SIGNAL-GROUND CONDUCTORS. (SEE TABLE 1) BALANCED IS MEASURED BETWEEN CONDUCTORS WITHIN A PAIR. NOTE: AVAILABLE IN STANDARD 100FT OR 300FT ROLLS. PLEASE SPECIFY WHEN ORDERING. 2 ENVIRONMENTAL: CONTACT 3M FOR AVAILABILITY OF ADDITIONAL CONDUCTOR COUNTS AND/OR CUSTOM ROLL LENGTHS. TEMPERATURE RATING: -40 C TO 105 C (EIA-364-32G, METHOD A, TEST CONDITION 2) -10 C TO +105 C (UL TEMPERATUE RATING) FLAMMABILITY RATING: UL: HORIZONTAL HALOGEN FREE IS DEFINED AS BOTH 1) NO HALOGN COMPOUNDS THAT ARE INTENTIONALLY ADDED TO THE PRODUCT OR USED IN THE MANUFACTURING PROCESS FOR THE PRODUCT AND 2) ANY IMPURITIES PRESENT C 79052 MAY 25,2018 JNC BM ARE LESS THAN 900ppm BROMINE, LESS THAN 900ppm CHLORINE AND/OR LESS THAN 1500ppm TOTAL REVISED AND REDRAWN BROMINE AND CHLORINE. THE LATTER ARE THE LEVELS SET FORTH IN CERTIAN INDUSTRY STANDARDS FOR DESIGN REFERENCE NEXT ASSEMBLY REV ECO ISSUE DATE AND DESCRIPTION DRFT CHKD PRINTED CIRCUIT BOARDS, SUCH AS THE INTERNATIONAL ELECTROTECHNICAL COMMISSION (IEC) 61249-2-21 ACCESS DRFT DATE MFG DATE CODES CASTIGLIONE MAY 25,2018 STANDARDS. THIS INFORMATION REPRESENTS 3M S KNOWLEDGE AND BELIEF WHICH MAY BE BASED IN WHOLE CHKD DATE APPVL DATE OR IN PART ON INFORMATION PROVIDED BY 3RD PARTY SUPPLIERS TO 3M. B. MIZE MAY 25,2018 A A DIVISION DIVISION CODE C 3M COPYRIGHT 2018 3M Center EMSD This document and the information it contains are 3M property and may not be reproduced or further St. Paul, SCALE TOLERANCES DO NOT distributed without 3M permission, or used or EXCEPT AS MN 55144 disclosed other than for 3M authorized purposes. 25 SCALE All rights reserved. NOTED 1 DRAWING TITLE INCHES INCH MM .0 3M ELECTRONICS MATERIALS SOLUTIONS DIVISION ROUND CONDUCTOR FLAT .00 TOLERANCE - UNLESS NOTED R INTERCONNECT SOLUTIONS .000 CABLE, .050 , 28AWG .X .XX .XXX THIRD ANGLE PROJECTION .0000 8 7 6 5 4 3 2 1 D D Regulatory: For regulatory information about this product, visit 3M.com/regs or contact your 3M representative. Technical Information: The technical information, recommendations and other statements contained in this document are based upon tests or experience that 3M believes are reliable, but the accuracy or completeness of such information C C is not guaranteed. Product Use: Many factors beyond 3M s control and uniquely within user s control can affect the use and performance of a 3M product in a particular application. Given the variety of factors that can affect the use and performance of a 3M product, user is solely responsible for evaluating the 3M product and determining whether it is fit for a particular purpose and suitable for user s method of application. Warranty, Limited Remedy, and Disclaimer: Unless an additional warranty is specifically stated on the applicable 3M product packaging or product literature, 3M warrants that each 3M product meets the applicable 3M product specification at the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OR TRADE. If the 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M s option, replacement of the 3M product or refund of the purchase price. Limitation of Liability: Except where prohibited by law, 3M will not be liable for any loss or damage arising from the 3M product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability. B B 3M Electronics Materials Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 1-800-225-5373 www.3M.com/interconnect C 79052 MAY 25,2018 JNC BM REVISED AND REDRAWN DESIGN REFERENCE NEXT ASSEMBLY REV ECO ISSUE DATE AND DESCRIPTION DRFT CHKD ACCESS DRFT DATE MFG DATE CODES CASTIGLIONE MAY 25,2018 CHKD DATE APPVL DATE B. MIZE MAY 25,2018 A A DIVISION DIVISION CODE C 3M COPYRIGHT 2018 3M Center EMSD This document and the information it contains are 3M property and may not be reproduced or further St. Paul, SCALE TOLERANCES DO NOT distributed without 3M permission, or used or EXCEPT AS MN 55144 disclosed other than for 3M authorized purposes. 1 SCALE All rights reserved. NOTED 1 DRAWING TITLE INCHES .0 ROUND CONDUCTOR FLAT .00 .000 CABLE, .050 , 28AWG THIRD ANGLE PROJECTION .0000 MILLIMETERS INTERPRET PER STRANDED, HAL-FREE ASME Y14.5 - 2009 0 .0 CAGE SIZE DRAWING NO. REV. MAX SURFACE ROUGHNESS .00 NUMBER ALL SURFACES .000 78-5100-2334-0 C MODEL DET. MARKED ONLY ANGLES HF365 YES NO SHT 2 OF 2 LISTS 8 7 6 5 4 3 2 1 78-5100-2334-0 C DRAWING NUMBER REVISION Imaged: Central Standard Time 5/25/2018 -- UTC Offset (hrs) 6